Natural gas compressor system composed of a oil-onjected screw compressor, directly coupled to an electric motor through a flexible coupling, controlled by inverter and by pass.
The regulator system could be customized to follow customer needs.

Typically used for turbine fuel, endothermic engine or booster.

For more information about the application see also: Power Generation.

air and biogas compression system with screw compressor
air and biogas compression system with screw compressor
air and biogas compression system with screw compressor
air and biogas compression system with screw compressor

General information

Up to 1 MW

POWER

Up to 40 bar

PRESSURE

Up to 6000 m3/h

FLOW RATE

See our references:

air and biogas compression system with screw compressor
air and biogas compression system with screw compressor

See other products for biogas application

gas pack air and biogas compression system with screw compressor

VGE, VGI and VGP Series

Natural gas compressor system composed of oil-injected screw compressor, directly coupled to an electric motor through a flexible coupling, controlled by inverter and by pass.

Contac us for a customized offer

    Gases typologies BiogasNatural gasAirOther gas type
    null

    The strength of the screw

    The core of Adicomp compressor stations is the screw pumping unit. It is designed and manufactured by the Termomeccanica Group, of which Adicomp is an integral part.
    null

    Plug & Play

    All Adicomp compressors are designed and made to maximise ease of installation. No special operations are required, except for installation on site and an electricity and gas supply. Everything is already set up in the company and, thanks to the commissioning service, you can fine-tune the operation of the package on site.
    null

    Energy savings, flow control, slide valve

    At Adicomp we keep an eye on energy savings and our compressors are designed to adapt to the flow of gas, which usually is not constant. To do this, our packages can be fitted with inverters, by-pass elements and a slide valve.
    null

    Heat recovery

    About 80% of the heat generated by a screw compressor can be recovered and used to reduce overall energy costs and thereby power various utilities. How? Thanks to dedicated oil/water or gas/water heat exchangers connected to the water supply on site.