References

Model VG200 – KAZAKISTAN

Two screw compressors for carbon dioxide application for the chemical industry. The compressors are water-cooled and installed indoors.

Model ADILR9-37 – FRANCE

Two oil free two-stage reciprocating compressors for biomethane grid injection installed in France. The compressors are installed inside a 30’ container, with a dedicated control room for the electrical panels and a dry-cooler positioned on the roof. They are water-cooled, equipped with an electric by-pass valve and controlled by PLC.

Model UVG160 – France

Two screw biogas compressors for upgrading installed in anaerobic digestion plant located in France. Air cooled, equipped with stainless steel heat exchanger for heat recovery, completed with fine filtration and sound proof and weather proof canopy suitable for outdoor installation -10°C/+40°C

Model UVG110/BVG30 – France

Two open frame screw compressors for biogas upgrading suitable for membrane application and installed inside a container. Designed for classified Atex Zone 2 and suitable for indoor installation + 3/+40°C, both compressors are water-cooled and completed with gas treatment system.

Model UVG400 – SWEDEN

Screw biogas compressor for upgrading installed in container 20″ equipped with silencers for noise reduction down to 80 dB@1m. Designed for classified Atex Zone 2, suitable for outdoor installation -40/+40°C, completed with heat recovery system and controlled by PLC.

Model PB 30 – Romania

Compressor for sweet wellhead gas. It is belt driven and with fixed speed. It is equipped with suction pressure regulator, scrubber and filter. Designed for outdoor installation -20/+40°C ambient temperature, suitable for Atex Zone 2. Equipped with S1-20 control module modbus RTU communication.

Model VG132 – GERMANY

Screw natural gas compressor for Kawasaki gas turbine feeding. It is designed for classified Atex Zone 2 for outdoor installation with flow regulation through inverter, slide valve and electro pneumatic by-pass. It is completed with medium oil filtration.

Model BVG355 – BRAZIL

Screw biogas compressor for upgrading based on PSA technology installed in Brazil. Designed for classified Atex Zone 2 in compliance with Brazilian standards, PLC controlled, completed with suction dewatering system and gas treatment system.

Model UVG400 – France

Screw biogas compressor for upgrading installed in anaerobic digestion plant located in France. Air cooled, equipped with stainless steel heat exchanger for heat recovery, completed with sound proof and weather proof canopy suitable for outdoor installation -20°C/+40°C.

Model UVG500 – UK

Screw biogas compressor for upgrading installed in container 20″ equipped with silencers for noise reduction down to 80 dB@1m. Designed for classified Atex Zone 2, suitable for outdoor installation -20/+40°C, completed with heat recovery system and controlled by PLC.

Model UVG250 – SWEDEN

Screw biogas compressor for upgrading installed in Sweden. Designed for classified Atex Zone 2 for outdoor installation, completed with heat recovery.

Model UVG132 – FRANCE

Screw biogas compressor for upgrading, installed in anaerobic digestion plant located in France. Designed for classified Atex Zone 2 and outdoor installation, completed with suction filter, heat recovery, by-pass system and control of gas outlet temperature.

Model BVG160 – ITALY

Screw biogas compressor for upgrading based on PSA technology installed in container 40″ located in Sicily. Designed for classified Atex Zone 2, suitable for outdoor conditions -20/45°C, completed with suction dewatering system and gas treatment system.

Model ADILR9-37 – FRANCE

Two-stage oil free reciprocating gas compressor for biomethane grid injection installed in France. Designed for classified Atex Zone 2 for outdoor installation, completed with electrical by-pass valve and controlled by PLC.

Model UVG160 – FRANCE

Screw compressor for biogas upgrading located in France. Designed for outdoor installation, completed with heat recovery, fine filtration and temperature control. It is equipped with silencers (maximum noise level: 80 dB(A) at 1 meter).

Model UVG250 – DENMARK

Screw biogas compressor for upgrading installed in anaerobic digestion plant located in Denmark. Designed for classified Atex Zone 2 for outdoor installation, completed with heat recovery and silencers.

Model UVG200 – FRANCE

Screw biogas compressor for upgrading installed in anaerobic digestion plant located in France. Designed for classified Atex Zone 2 for outdoor installation, completed with suction filter,  heat recovery, fine filtration and temperature control.

Model UVG90 – FRANCE

Screw biogas compressor for upgrading installed in anaerobic digestion plant located in France. Designed for classified Atex Zone 2 for outdoor installation, completed with heat recovery.

Model VG250 – ROMANIA

Screw natural gas compressor water cooled for Solar Turbomach gas turbine feeding. Installed in paper mill facility in Romania, designed for classified Atex Zone 2 for indoor installation and completed with medium oil filtration.

Model UVG250 – ITALY

Two screw biogas compressors for upgrading installed into two containers 40 feet in waste water treatment plant located in Italy. The compressors are water cooled with dry cooler installed on the roof of each container. Designed for classified Atex Zone 2 for outdoor installation, completed with heat recovery and gas treatment system.

Model UVG132 – FRANCE

Screw biogas compressor for upgrading, installed in anaerobic digestion plant located in France. Designed for classified Atex Zone 2 for outdoor installation, completed with heat recovery and silencers

Model UVG160 – FRANCE

Screw compressor installed in France, located in an industrial biogas purification plant for the production of biomethane. Designed for classified Atex Zone 2 for outdoor installation, completed with heat recovery, fine filtration and temperature control.

Model UVG160 – ITALY

Screw compressor for biogas upgrading located in Italy. Designed for classified Atex Zone 2 for outdoor installation, completed with heat recovery and temperature control.

Model UVG160 – FRANCE

Screw compressor for biogas upgrading located in France. Designed for outdoor installation, completed with heat recovery, fine filtration and temperature control. It is equipped with silencers (maximum noise level: 80 dB(A) at 1 meter).

Model UVG55 – FRANCE

Screw compressor for biogas upgrading located in France. Open frame, installed inside container, completed with gas treatment, heat recovery and separate remote cooling system (installed on the roof). It is equipped with silencers.

Model UVG110 – FRANCE

Screw biogas compressor for upgrading installed in France. Designed for classified Atex Zone 2 for outdoor installation, completed with filtration and heat recovery.

Model UVG400 – Holland

Screw compressor for upgrading installed in Holland. Designed for classified Atex Zone 2 for outdoor installation, completed with silencers, treatment and heat recovery.

Model UVG200 – Italy

Two screw compressor for upgrading, installed in advanced biomethane production plant located in Italy.

Model UVG132 – France

Screw biogas compressor for upgrading, installed in anaerobic digestion plant located in France. Designed for classified Atex Zone 2 for outdoor installation, completed with heat recovery.

Model VG75 – Italy

Screw natural gas compressor for gas turbine feeding. Designed for Atex zone 2.

Model BVG45 – France

Screw biogas compressor for anaerobic digestion plant. Designed for classified Atex Zone 2, open frame, completed with heat recovering and gas treatment system for oil removal. Coupled with reciprocating compressor in order to build up the pressure until 20 bar.

Model BVG355 – Croatia

Wellhead gas compressor open frame with inlet scrubber able to remove up to 20 m3 of water. Equipped with inlet pressure control valve in order to reduce down to 200 mbar(g). Installed in area classified as Zone 2, Gas group IIA, Temperature class T3.

Model BVG110 – Croatia

Wellhead gas compressor open frame with inlet scrubber able to remove up to 9 m3 of water. Equipped with inlet pressure control valve in order to reduce down to 200 mbar(g). Installed in area classified as Zone 2, Gas group IIA, Temperature class T3.

Model BVG75 – Russia

Natural Gas compressors for a microcogeneration plant. These units are installed inside a contaioner to supply no.4 C200 Capstone microturbines, producing  800kW of electric energy. ATEX zone 2. There is also a similar installations in Rodnikovka, Russia

Model BVG37

Biogas compressor for cogeneration plant. The BVG37 is installed outdoor to feed a Capstone microturbine. Weather proof execution equipped with a integrated gas treatment system suitable for ATEX zone 2.

Model BVG55 – Italy

Landfill gas compressor for cogeneration plant, where two units BVG55 are installed in a single skid inside a sound-proof canopy including also a refrigeration dryer. These compressors supply seven Capstone microturbines CR65.

Model BVG160 – UK

Landfill gas compressor for biomethanization plant.
Final destination is U.K.

Model BVG250 – UK

Biogas compressor for a biomethanization plant in combination with a biogas upgrading system through membranes. Designed for classified Atex Zone 2, open frame, skid mounted into a container, complete with gas treatment system for oil removal.
Final destination is U.K. national grid.

air and biogas compression system with screw compressor

Model BVG37 – Spain

Biogas compressor to feed OPRA turbines for a power generation plant. Suitable for ATEX zone 2 and outdoor installation (weather proof).

air and biogas compression system with screw compressor

Model BVG7.5 – Thailand

Designed to pressurize a digester recirculation system. Weather proof canopy for outdoor installation, ATEX Zone 2.

air and biogas compression system with screw compressor

Model BVG37 – France

Full featured compression station designed to feed GE JENBA CHER engines. Equipped with a complete with gas treatment system for water, oil, and dust removal.

air and biogas compression system with screw compressor

Model BVG160 – UK

Biogas compressor to feed PSA system in a biomethanization plant. Designed for classified area ATEX Zone 2 and outdoor installation.

air and biogas compression system with screw compressor

Model BVG11 – Italy

Full featured biogas compression & treatment station designed to feed GE JENBACHER engines. Equipped with a complete gas treatment system for water, oil and dust removal.

sistema di compressione di aria e biogas con compressore rotativo a vite

Model BVG200x2 – UK

Biogas compression and treatment station, built into a container, to feed a membrane upgrading system, ATEX Zone 2, equipped with gas treatment system and heat recovery.

air and biogas compression system with screw compressor

Model VG45 – UK

Booster for biomethane injection into UK national grid . Designed for classified area ATEX zone 2 and for outdoor installation, equipped with a complete gas treatment system.

air and biogas compression system with screw compressor

Model BVG22 – France

Full featured biogas compression & treatment station designed to feed GE JENBACHER engines. Equipped with a complete gas treatment system for water, oil,and dust removal.

air and biogas compression system with screw compressor

Model BVG11 – Finland

Landfill gas compressor installed inside a container to supply an Elliot turbine T100. Open frame version suitable for ATEX Zone2.

air and biogas compression system with screw compressor

Model BVG22 – Germany

Biogas compressor for power generation plant. A single units isinstalled inside a container to supply a Capstone C200 turbine, producing 200 KW of electric energy. 

air and biogas compression system with screw compressor

Model BVG75 – Russia

Natural Gas compressor for cogeneration plant. These units are installed inside a container to supply four C200 Capstone turbines, producing 800 kW of power.

air and biogas compression system with screw compressor

Model BVG90 – France

Landfill gas compressor for a biomethanization plant in combination with a biogas upgrading system through PSA. Weather proof, suitable for ATEX Zone 2.

air and biogas compression system with screw compressor

Model BVG90 – Austria

Three biogas compressors for a biomethanization plant in combination with a biogas upgrading system through membranes. Designed for classified ATEX Zone 2, water cooled.

air and biogas compression system with screw compressor

Model BVG250 – Turkey

Developed to feed n°2 Solar (Caterpillar) turbines.Designed for classified ATEX Zone2, sound proof, weather proof equipped withdust, water and oil removal system.

air and biogas compression system with screw compressor

Model BVG132 – UK

Biogas compressors for a biomethanization plant. Two stages, first and second stage with screw, powered by a single motor. Weather proof, suitable for ATEX Zone 2.

air and biogas compression system with screw compressor

Model BVG160 – China

Biogas compressors for a biomethanization plant in combination with a biogas upgrading system through PSA. Explosion proof, open frame, skid mounted.

Contact us

for more informations