Application: Biogas upgrading

BIOGAS COMPRESSOR UVG355 LOCATION: FRANCEFLUID: BiogasPOWER INSTALLED: 450 kW (x3)INLET PRESSURE: 70 mbar(g)WORKING PRESSURE: Up to 16 bar(g)FLOW RATE: 0<1026<2053 Nm³/hAMBIENT TEMPERATURE: -20/45 °C Three screw compressors air cooled, for biogas upgrading located in France. Designed for classificated Atex Zone 2, completed with stainless steel heat exchanger for heat recovery and sound proof and weather proof canopy suitable for outdoor installation -20°C/+45°C.

BIOGAS COMPRESSOR UVG500 LOCATION: USAFLUID: BiogasPOWER INSTALLED: 480 kWINLET PRESSURE: 50 mbar(g)WORKING PRESSURE: Up to 14 bar(g)FLOW RATE: 0<1350<2700 Nm³/hAMBIENT TEMPERATURE: +3/+45 °C Screw compressor for biogas upgrading located in USA and designed in compliance with US standards. It is suitable for indoor installation, water-cooled, equipped with post-compression treatment and controlled by PLC.

BIOGAS COMPRESSORS UVG160/BVG75 LOCATION: ITALYFLUID: Biogas  UVG 160                                                                                                    POWER… Continue reading UVG160/BVG75-Italy

BIOGAS COMPRESSOR UVG132 LOCATION: USAFLUID: BiogasPOWER INSTALLED: 160 kWINLET PRESSURE: 100 mbar(g)WORKING PRESSURE: Up to 16 bar(g)FLOW RATE: 0<355<711 Nm³/hAMBIENT TEMPERATURE: -20/40 °C Screw compressor for biogas upgrading located in USA. Designed in compliance with North American standards, suitable for outdoor installation, completed fine filtration and temperature control.

BIOGAS COMPRESSOR UVG250 LOCATION: DENMARKFLUID: BiogasPOWER INSTALLED: 315 kWINLET PRESSURE: 70 mbar(g)WORKING PRESSURE: Up to 15.5 bar(g)FLOW RATE: 0<690<1380 Nm³/hAMBIENT TEMPERATURE: -20/40 °C Screw compressor for biogas upgrading located in Denmark. Designed for classificated Atex Zone 2 for outdoor installation, completed with heat recovery, fine filtration and temperature control. It is equipped with silencers for reducing the noise level to 80 dB(A)… Continue reading UVG250-Denmark

BIOGAS COMPRESSOR UVG160 LOCATION: FRANCEFLUID: BiogasPOWER INSTALLED: 200 kWINLET PRESSURE: 100 mbar(g)WORKING PRESSURE: Up to 16.5 bar(g)FLOW RATE: 0<844 Nm³/hAMBIENT TEMPERATURE: -20/40 °C Screw compressor for biogas upgrading located in France. Designed for classificated Atex Zone 2 for outdoor installation, completed with heat recovery, fine filtration and temperature control. It is equipped with silencers.

BIOGAS COMPRESSOR UVG110 LOCATION: FranceFLUID: BiogasPOWER INSTALLED: 160 kWINLET PRESSURE: 100 mbar(g)WORKING PRESSURE: up to 15 bar(g)FLOW RATE: 0<700 Nm³/hAMBIENT TEMPERATURE: -20/40 °C Screw biogas compressor for upgrading installed in France. Designed for classified Atex Zone 2 for outdoor installation, completed with filtration and heat recovery.

BIOGAS COMPRESSOR UVG160 LOCATION: FranceFLUID: BiogasPOWER INSTALLED: 200 kW (each one)INLET PRESSURE: 150 mbar(g)WORKING PRESSURE:  up to 14 bar(g)FLOW RATE: 0<448<897 Nm³/h (each one)AMBIENT TEMPERATURE: -10/+40 °C Two screw biogas compressors for upgrading installed in anaerobic digestion plant located in France. Air cooled, equipped with stainless steel heat exchanger for heat recovery, completed with fine filtration and sound proof and weather… Continue reading UVG160-France

BIOGAS COMPRESSORS UVG110/BVG30 LOCATION: ItalyFLUID: Biogas UVG 110POWER INSTALLED: 132 kWINLET PRESSURE: 400 mbar(g)WORKING PRESSURE:  10-12 bar(g)FLOW RATE: 0<775 Nm³/hAMBIENT TEMPERATURE: +3/+40 °C BVG 30POWER INSTALLED: 30 kWINLET PRESSURE: 500 mbar(g)WORKING PRESSURE:  3.2-5.0 bar(g)FLOW RATE: 0<250 Nm³/hAMBIENT TEMPERATURE: +3/+40 °C Two open frame screw compressors for biogas upgrading suitable for membrane application and installed inside a container. Designed for classified Atex Zone 2 and suitable… Continue reading UVG110/BVG30-Italy

BIOGAS COMPRESSOR UVG400 LOCATION: SwedenFLUID: BiogasPOWER INSTALLED: 500 kWINLET PRESSURE: 300 mbar(g)WORKING PRESSURE:  13.8-14.3 bar(g)FLOW RATE: 0<1385<2770 Nm³/hAMBIENT TEMPERATURE: -40/+40 °C Screw biogas compressor for upgrading installed in container 20″ equipped with silencers for noise reduction down to 80 dB1m. Designed for classified Atex Zone 2, suitable for outdoor installation -40/+40°C, completed with heat recovery system and controlled by PLC.