BIOGAS COMPRESSOR UVG250 LOCATION: GERMANYFLUID: BiogasPOWER INSTALLED: 315 kWINLET PRESSURE: 150 mbar(g)WORKING PRESSURE: Up to 15.2 bar(g)FLOW RATE: : 0<725<1449 Nm³/hAMBIENT TEMPERATURE: -20/+40 °C Screw biogas compressor for upgrading located in Germany. Designed for classified Atex Zone 2 for outdoor installation. It is,completed with heat recovery, temperature control, fully electrical by-pass system and controlled by PLC. It is equipped with silencers for… Continue reading UVG250-Germany
Application: Biogas upgrading
Serie SSG
Serie SSG Queste stazioni di compressione e trattamento del gas a umido e secco sono progettate in uno skid facilmente movimentabile, composto da un blocco rotativo a vite per gas a iniezione d’olio, direttamente accoppiato a un motore elettrico, controllato da inverter, tramite un accoppiamento flessibile o magnetico. Adicomp è lieta di annunciare di aver… Continue reading Serie SSG
UVG200-France
BIOGAS COMPRESSOR UVG200 LOCATION: FRANCEFLUID: BiogasPOWER INSTALLED: 200 kWINLET PRESSURE: 0.150 bar(g)WORKING PRESSURE: Up to 14 bar(g)FLOW RATE: : 0<584<1105Nm³/hAMBIENT TEMPERATURE: -10/+40 °C Screw biogas compressor for upgrading located in France. Designed for classified Atex Zone 2 for outdoor installation. It is completed with heat recovery, temperature control, fully electrical by-pass system and controlled by PLC.
UVG200/UVG110-Italy
BIOGAS COMPRESSORS UVG200/ UVG110 UVG 200 LOCATION: ITALYFLUID: Biogas POWER INSTALLED: 250 kW INLET PRESSURE: 400 mbar(g)WORKING PRESSURE: Up to 14 bar(g)FLOW RATE: 0<689<1395 Nm³/hAMBIENT TEMPERATURE: -10/+40°C UVG 110 LOCATION: ITALYFLUID: BiogasPOWER INSTALLED: 160 kW INLET PRESSURE: 400 mbar(g)WORKING PRESSURE: Up to 14 bar(g)FLOW RATE: 0<381<762 Nm³/hAMBIENT TEMPERATURE: -10/+40°C Two screw biogas compressors for upgrading located in Italy. Designed for classified Atex Zone 2 for outdoor installation, air cooled… Continue reading UVG200/UVG110-Italy
UVG250-Italy
BIOGAS COMPRESSOR UVG250 LOCATION: ITALYFLUID: BiogasPOWER INSTALLED: 315 kWINLET PRESSURE: 400 mbar(g)WORKING PRESSURE: Up to 16 bar(g)FLOW RATE: : 0<807<1614 Nm³/hAMBIENT TEMPERATURE: -10/+40 °C Screw biogas compressor for upgrading located in Italy. Designed for classified Atex Zone 2 for outdoor installation. Air-cooled,completed with heat recovery, temperature control, fine filtration and controlled by PLC. It is equipped with silencers for reducing the noise… Continue reading UVG250-Italy
UVG132-France
BIOGAS COMPRESSOR UVG132 LOCATION: FRANCEFLUID: BiogasPOWER INSTALLED: 160 kWINLET PRESSURE: 0.150 bar(g)WORKING PRESSURE: Up to 18 bar(g)FLOW RATE: : 0<321<642Nm³/hAMBIENT TEMPERATURE: -10/+40 °C Screw biogas compressor for upgrading located in France. Designed for classified Atex Zone 2 for outdoor installation. It is completed with heat recovery, temperature control, fine filtration, fully electrical by-pass system and controlled by PLC.
BVG160-USA
BIOGAS COMPRESSOR BVG160 LOCATION: USAFLUID: BiogasPOWER INSTALLED: 200 kW INLET PRESSURE: 0.1 bar(g)WORKING PRESSURE: Up to 9 bar(g)FLOW RATE: 0<601<1202 Nm³/hAMBIENT TEMPERATURE: -20/+40 °C Screw biogas compressor for upgrading located in USA. Designed in compliance with north american standards, suitable for outdoor installation, air-cooled, completed with electro-pneumatic by-pass system, temperature control, fine filtration and controlled by PLC.
UVG160-France
BIOGAS COMPRESSOR UVG160 LOCATION: FRANCEFLUID: BiogasPOWER INSTALLED: 160 kWINLET PRESSURE: 150 mbar(g)WORKING PRESSURE: Up to 14 bar(g)FLOW RATE: : 0<480<961 Nm³/hAMBIENT TEMPERATURE: -20/+40 °C Screw biogas compressor for upgrading located in France. Designed for classified Atex Zone 2 for outdoor installation. It is air-cooled,completed with heat recovery, temperature control, bleed valve for depressurization and controlled by PLC.
UVG500-Netherlands
BIOGAS COMPRESSOR UVG500 LOCATION: NETHERLANDSFLUID: BiogasPOWER INSTALLED: 630 kWINLET PRESSURE: 95 mbar(g)WORKING PRESSURE: Up to 15.5 bar(g)FLOW RATE: : 0<1330<2660 Nm³/hAMBIENT TEMPERATURE: +3/+40 °C Screw biogas compressor for upgrading located in the Netherlands. Designed for classified Atex Zone 2 for indoor installation. It is water-cooled ,completed with heat recovery, temperature control, bleed valve for depressurization and controlled by PLC.
UVG250-France
BIOGAS COMPRESSOR UVG250 LOCATION: FRANCEFLUID: BiogasPOWER INSTALLED: 2x 315 kWINLET PRESSURE: 0.150 bar(g)WORKING PRESSURE: Up to 16.5 bar(g)FLOW RATE: : 0<679<1358 Nm³/hAMBIENT TEMPERATURE: -10/+40 °C Two single-stage compressors for upgrading located in France. Designed for classified Atex Zone 2 for outdoor installation. Equipped with fully electrical by-pass system, heat recovery, temperature control and controlled by PLC.