Application: Biogas upgrading

BIOGAS COMPRESSOR UVG132 LOCATION: FRANCEFLUID: BiogasPOWER INSTALLED: 160 kWINLET PRESSURE: 0.150 bar(g)WORKING PRESSURE: Up to 18 bar(g)FLOW RATE: : 0<321<642Nm³/hAMBIENT TEMPERATURE: -10/+40 °C Screw biogas compressor for upgrading located in France. Designed for classified Atex Zone 2 for outdoor installation. It is completed with heat recovery, temperature control, fine filtration, fully electrical by-pass system and controlled by PLC.

BIOGAS COMPRESSOR BVG160 LOCATION: USAFLUID: BiogasPOWER INSTALLED: 200 kW INLET PRESSURE: 0.1 bar(g)WORKING PRESSURE: Up to 9 bar(g)FLOW RATE: 0<601<1202 Nm³/hAMBIENT TEMPERATURE: -20/+40 °C Screw biogas compressor for upgrading located in USA. Designed in compliance with north american standards, suitable for outdoor installation, air-cooled, completed with electro-pneumatic by-pass system, temperature control, fine filtration and controlled by PLC.

BIOGAS COMPRESSOR UVG160 LOCATION: FRANCEFLUID: BiogasPOWER INSTALLED: 160 kWINLET PRESSURE: 150 mbar(g)WORKING PRESSURE: Up to 14 bar(g)FLOW RATE: : 0<480<961 Nm³/hAMBIENT TEMPERATURE: -20/+40 °C Screw biogas compressor for upgrading located in France. Designed for classified Atex Zone 2 for outdoor installation. It is air-cooled,completed with heat recovery, temperature control, bleed valve for depressurization and controlled by PLC.

BIOGAS COMPRESSOR UVG500 LOCATION: NETHERLANDSFLUID: BiogasPOWER INSTALLED: 630 kWINLET PRESSURE: 95 mbar(g)WORKING PRESSURE: Up to 15.5 bar(g)FLOW RATE: : 0<1330<2660 Nm³/hAMBIENT TEMPERATURE: +3/+40 °C Screw biogas compressor for upgrading located in the Netherlands. Designed for classified Atex Zone 2 for indoor installation. It is water-cooled ,completed with heat recovery, temperature control, bleed valve for depressurization and controlled by PLC.

BIOGAS COMPRESSOR UVG250 LOCATION: FRANCEFLUID: BiogasPOWER INSTALLED: 2x 315 kWINLET PRESSURE: 0.150 bar(g)WORKING PRESSURE: Up to 16.5 bar(g)FLOW RATE: : 0<679<1358 Nm³/hAMBIENT TEMPERATURE: -10/+40 °C Two single-stage compressors for upgrading located in France. Designed for classified Atex Zone 2 for outdoor installation. Equipped with fully electrical by-pass system, heat recovery, temperature control and controlled by PLC.

BIOGAS COMPRESSOR UVG200 LOCATION: FRANCEFLUID: BiogasPOWER INSTALLED: 250 kWINLET PRESSURE: 400 mbar(g)WORKING PRESSURE: Up to 14 bar(g)FLOW RATE: : 0<698<1395 Nm³/hAMBIENT TEMPERATURE: -10/+40 °C Screw biogas compressor for upgrading located in France. Designed for classified Atex Zone 2 for outdoor installation, completed with bleed valve, heat recovery, temperature control, electro-pneumatic by pass valve and it is equipped with silencers.

BIOGAS COMPRESSOR BVG90 LOCATION: INDIAFLUID: BiogasPOWER INSTALLED: 2×110 kWINLET PRESSURE: 850 mbar(g)WORKING PRESSURE: Up to 8.5 bar(g)FLOW RATE: : 0<435<870 Nm³/hAMBIENT TEMPERATURE: 0/+40 °C Two screw biogas compressors for upgrading located in India. Designed for classified Atex Zone 2 for outdoor installation, air-cooled, completed with bleed valve and controlled by PLC. It is equipped with electro-pneumatic by pass valve.

BIOGAS COMPRESSOR UVG200 LOCATION: FRANCEFLUID: BiogasPOWER INSTALLED: 250 kWINLET PRESSURE: 0.150 bar(g)WORKING PRESSURE: Up to 14 bar(g)FLOW RATE: : 0<552<1105 Nm³/hAMBIENT TEMPERATURE: -10/+40 °C Screw biogas compressor for upgrading located in France. Designed for classified Atex Zone 2 for outdoor installation, completed with suction gas filter and controlled by PLC. It is equipped with fully electrical by-pass system.

BIOGAS COMPRESSOR UVG500 LOCATION: CANADAFLUID: BiogasPOWER INSTALLED: 500 kW INLET PRESSURE: 0.05 bar(g)WORKING PRESSURE: Up to 10.5 bar(g)FLOW RATE: 0<1498<2997 Nm³/hAMBIENT TEMPERATURE: -3/+40 °C Screw compressor for biogas upgrading located in Canada. Designed in compliance with CSA and ASME standards, water-cooled, suitable for indoor installation, completed with temperature control, bleed valve for depressurization to vent and controlled by PLC. It is Equipped… Continue reading UVG500-Canada

BIOGAS COMPRESSOR UVG55 LOCATION: FRANCEFLUID: BiogasPOWER INSTALLED: 75 kWINLET PRESSURE: 150 mbar(g)WORKING PRESSURE: Up to 16 bar(g)FLOW RATE: 0<150<301 Nm³/hAMBIENT TEMPERATURE: -20/+40 °C Screw biogas compressor for upgrading located in France. Designed for classified Atex Zone 2 for outdoor installation, air-cooled, completed with temperature control, heat recovery and controlled by PLC. It is equipped with electro-pneumatic by-pass system.