Biogas Compressors UVG160-BVG75 Italy

BIOGAS COMPRESSORS

UVG160/BVG75

LOCATION: ITALY
FLUID: Biogas 

UVG 160                                                                                                    
POWER INSTALLED:
 200 kW (x3)
INLET PRESSURE: 400 mbar(g)
WORKING PRESSURE: Up to 12.3 bar(g)
FLOW RATE: 0<540<1080 Nm³/h
AMBIENT TEMPERATURE: -10/+40 °C

BVG 75                                                                                                             
POWER INSTALLED:
 75 kW (x2)
INLET PRESSURE: 500 mbar(g)
WORKING PRESSURE: Up to 4 bar(g)
FLOW RATE: 0<382<763 Nm³/h
AMBIENT TEMPERATURE: -10/+40 °C

 

Five screw compressors for biogas upgrading located in Italy. Three of them provides the biogas to the upgrading system, instead two of them recirculates the remaining methane and carbon dioxide to achieve greater efficiency for its recovery through the upgrade system. All compressors are designed for classificated Atex Zone 2, completed with fine filtration and temperature control.

[contact_form]

OTHER REFERENCES

Model UVG 250

Germany

Screw biogas compressor for upgrading located in Germany. Designed for classified Atex Zone 2 for outdoor installation. It is,completed with heat recovery, temperature control, fully electrical by-pass system and controlled by PLC. It is equipped with silencers for reducing the noise level to 75 dB@ 1m.
View more

Model VG 75

France

Screw compressor for biomethane located in France. Designed for classified Atex Zone 2 for outdoor installation. Water-cooled, completed with temperature control, fine filtration and controlled by PLC. It is equipped with silencers for reducing the noise level to 75 dB@ 1m.
View more

Model UVG 200

France

Screw biogas compressor for upgrading located in France. Designed for classified Atex Zone 2 for outdoor installation. It is completed with heat recovery, temperature control, fully electrical by-pass system and controlled by PLC.
View more

Model UVG200/UVG110

Italy

Two screw biogas compressors for upgrading located in Italy. Designed for classified Atex Zone 2 for outdoor installation, air cooled and completed with heat recovery and fine filtration. They’re equipped with silencers for reducing the noise level to 65 dB@10m.
View more

Model UVG 250

Italy

Screw biogas compressor for upgrading located in Italy. Designed for classified Atex Zone 2 for outdoor installation. Air-cooled,completed with heat recovery, temperature control, fine filtration and controlled by PLC. It is equipped with silencers for reducing the noise level to 65 dB@10m.
View more

Model UVG 132

France

Screw biogas compressor for upgrading located in France. Designed for classified Atex Zone 2 for outdoor installation. It is completed with heat recovery, temperature control, fine filtration, fully electrical by-pass system and controlled by PLC.
View more

Model BVG 160

USA

Screw biogas compressor for upgrading located in USA. Designed in compliance with north american standards, suitable for outdoor installation, air-cooled, completed with electro-pneumatic by-pass system, temperature control, fine filtration and controlled by PLC.
View more

Model ADI115-30

France

Double-stage reciprocating compressor for biomethane grid injection installed in France. Designed for classified Atex Zone 2 for outdoor installation, controlled by PLC and it is equipped with fully electrical by-pass system.
View more

Model ADI70-18.5

France

Double-stage reciprocating compressor for biomethane grid injection installed in France. Designed for classified Atex Zone 2 for outdoor installation. it is equipped with fully electrical by-pass system and controlled by PLC.
View more

Model UVG 160

France

Screw biogas compressor for upgrading located in France. Designed for classified Atex Zone 2 for outdoor installation. It is air-cooled,completed with heat recovery, temperature control, bleed valve for depressurization and controlled by PLC.
View more

Contact us

Write us for support or information