Application: Biogas upgrading

BIOGAS COMPRESSOR UVG110 LOCATION: FRANCEFLUID: BiogasPOWER INSTALLED: 2×132 kWINLET PRESSURE: 150 mbar(g)WORKING PRESSURE: Up to 14 bar(g)FLOW RATE: 0<320<640 Nm³/hAMBIENT TEMPERATURE: -20/+40 °C Two screw biogas compressors for upgrading located in France. Designed for classified Atex Zone 2 for indoor installation, completed with fully electrical by-pass valve and controlled by PLC.

BIOGAS COMPRESSOR UVG700 LOCATION: USAFLUID: BiogasPOWER INSTALLED: 660 kW (x2)INLET PRESSURE: 50 mbar(g)WORKING PRESSURE: Up to 16.5 bar(g)FLOW RATE: 0<1281<3156 Nm³/hAMBIENT TEMPERATURE: -20/+40 °C Two open frame screw compressors for biogas upgrading installed inside two separated containers (40’) in USA. Designed in compliance with US standards. They are suitable for outdoor installation, water-cooled, designed with special gas screw equipped with mechanical oil… Continue reading UVG700-USA

BIOGAS COMPRESSOR UVG400 LOCATION: USAFLUID: BiogasPOWER INSTALLED: 480 kW (x2)INLET PRESSURE: 70 mbar(g)WORKING PRESSURE: Up to 16.5 bar(g)FLOW RATE: 0<1103<2205 Nm³/hAMBIENT TEMPERATURE: -25/+40 °C Two screw compressors for biogas upgrading located in USA and designed in compliance with US standards. It is suitable for outdoor installation, air-cooled, equipped with suction heat exchanger, post-compression treatment, electromechanical by-pass system and controlled by PLC.

BIOGAS COMPRESSOR UVG160 LOCATION: FRANCEFLUID: BiogasPOWER INSTALLED: 200 kWINLET PRESSURE: 300 mbar(g)WORKING PRESSURE: Up to 15 bar(g)FLOW RATE: 0<550<1050 Nm³/hAMBIENT TEMPERATURE: +3/+40 °C Screw compressor water cooled, for biogas upgrading located in France. Designed for classificated Atex Zone 2 for indoor installation, completed with fine oil removal and controlled by PLC.

BIOGAS COMPRESSOR UVG160 LOCATION: NETHERLANDSFLUID: BiogasPOWER INSTALLED: 200 kWINLET PRESSURE: 80 mbar(g)WORKING PRESSURE: Up to 15.5 bar(g)FLOW RATE: 0<436<872 Nm³/hAMBIENT TEMPERATURE: -20/40 °C Screw compressor air cooled, for biogas upgrading located in the Netherlands. Designed for classificated Atex Zone 2 for outdoor installation, completed with heat recovery, fine filtration and temperature control.

BIOGAS COMPRESSOR UVG355 LOCATION: FRANCEFLUID: BiogasPOWER INSTALLED: 450 kW (x3)INLET PRESSURE: 70 mbar(g)WORKING PRESSURE: Up to 16 bar(g)FLOW RATE: 0<1026<2053 Nm³/hAMBIENT TEMPERATURE: -20/45 °C Three screw compressors air cooled, for biogas upgrading located in France. Designed for classificated Atex Zone 2, completed with stainless steel heat exchanger for heat recovery and sound proof and weather proof canopy suitable for outdoor installation -20°C/+45°C.

BIOGAS COMPRESSOR UVG500 LOCATION: USAFLUID: BiogasPOWER INSTALLED: 480 kWINLET PRESSURE: 50 mbar(g)WORKING PRESSURE: Up to 14 bar(g)FLOW RATE: 0<1350<2700 Nm³/hAMBIENT TEMPERATURE: +3/+45 °C Screw compressor for biogas upgrading located in USA and designed in compliance with US standards. It is suitable for indoor installation, water-cooled, equipped with post-compression treatment and controlled by PLC.

BIOGAS COMPRESSORS UVG160/BVG75 LOCATION: ITALYFLUID: Biogas  UVG 160                                                                                                    POWER… Continue reading UVG160/BVG75-Italy

BIOGAS COMPRESSOR UVG132 LOCATION: USAFLUID: BiogasPOWER INSTALLED: 160 kWINLET PRESSURE: 100 mbar(g)WORKING PRESSURE: Up to 16 bar(g)FLOW RATE: 0<355<711 Nm³/hAMBIENT TEMPERATURE: -20/40 °C Screw compressor for biogas upgrading located in USA. Designed in compliance with North American standards, suitable for outdoor installation, completed fine filtration and temperature control.

BIOGAS COMPRESSOR UVG250 LOCATION: DENMARKFLUID: BiogasPOWER INSTALLED: 315 kWINLET PRESSURE: 70 mbar(g)WORKING PRESSURE: Up to 15.5 bar(g)FLOW RATE: 0<690<1380 Nm³/hAMBIENT TEMPERATURE: -20/40 °C Screw compressor for biogas upgrading located in Denmark. Designed for classificated Atex Zone 2 for outdoor installation, completed with heat recovery, fine filtration and temperature control. It is equipped with silencers for reducing the noise level to 80 dB(A)… Continue reading UVG250-Denmark