UVG200-France

BIOGAS COMPRESSOR UVG200 LOCATION: FRANCEFLUID: BiogasPOWER INSTALLED: 250 kWINLET PRESSURE: 0.150 bar(g)WORKING PRESSURE: Up to 14 bar(g)FLOW RATE: : 0<552<1105 Nm³/hAMBIENT TEMPERATURE: -10/+40 °C Screw biogas compressor for upgrading located in France. Designed for classified Atex Zone 2 for outdoor installation, completed with suction gas filter and controlled by PLC. It is equipped with fully electrical by-pass system.

UVG500-Canada

BIOGAS COMPRESSOR UVG500 LOCATION: CANADAFLUID: BiogasPOWER INSTALLED: 500 kW INLET PRESSURE: 0.05 bar(g)WORKING PRESSURE: Up to 10.5 bar(g)FLOW RATE: 0<1498<2997 Nm³/hAMBIENT TEMPERATURE: -3/+40 °C Screw compressor for biogas upgrading located in Canada. Designed in compliance with CSA and ASME standards, water-cooled, suitable for indoor installation, completed with temperature control, bleed valve for depressurization to vent and controlled by PLC. It is Equipped… Continue reading UVG500-Canada

UVG55-France

BIOGAS COMPRESSOR UVG55 LOCATION: FRANCEFLUID: BiogasPOWER INSTALLED: 75 kWINLET PRESSURE: 150 mbar(g)WORKING PRESSURE: Up to 16 bar(g)FLOW RATE: 0<150<301 Nm³/hAMBIENT TEMPERATURE: -20/+40 °C Screw biogas compressor for upgrading located in France. Designed for classified Atex Zone 2 for outdoor installation, air-cooled, completed with temperature control, heat recovery and controlled by PLC. It is equipped with electro-pneumatic by-pass system.

UVG315/VG250-Spain

BIOGAS COMPRESSORS / RNG GRID INJECTION UVG315/ VG250 2x UVG 315   LOCATION: SPAINFLUID: Biogas    POWER INSTALLED: 400 kW (x2)INLET PRESSURE: 50 mbar(g)WORKING PRESSURE: Up to 15 bar(g)FLOW RATE: 0<1850<3700 Nm³/hAMBIENT TEMPERATURE: -10/+40°C VG 250 LOCATION: SPAINFLUID: Biomethane  POWER INSTALLED: 315 kW INLET PRESSURE: 50 mbar(g)WORKING PRESSURE: Up to 22.5 bar(g)FLOW RATE: 0<530<1045 Nm³/hAMBIENT TEMPERATURE: -10/+40°C   A complete automatic solution for biogas upgrading and biomethane grid injection consisting of:–… Continue reading UVG315/VG250-Spain

UVG90-France

BIOGAS COMPRESSOR UVG90 LOCATION: FRANCEFLUID: BiogasPOWER INSTALLED: 110 kWINLET PRESSURE: 150 mbar(g)WORKING PRESSURE: Up to 18 bar(g)FLOW RATE: 0<221<442 Nm³/hAMBIENT TEMPERATURE: -10/+40 °C Screw biogas compressor for upgrading located in France. Designed for classified Atex Zone 2 for outdoor installation, air-cooled, completed with temperature control, heat recovery and controlled by PLC. It is equipped with fully electrical by-pass system.

UVG315-Italy

BIOGAS COMPRESSOR UVG315 LOCATION: ITALYFLUID: BiogasPOWER INSTALLED: 355 kWINLET PRESSURE: 150 mbar(g)WORKING PRESSURE: Up to 14.5 bar(g)FLOW RATE: 0<700<1680 Nm³/hAMBIENT TEMPERATURE: +3/+40 °C Screw biogas compressor for upgrading located in Italy. Designed for classified Atex Zone 2 for indoor installation, water-cooled, completed with temperature control, fine filtration and controlled by PLC.

UVG355-Netherlands

BIOGAS COMPRESSOR UVG355 LOCATION: NETHERLANDSFLUID: BiogasPOWER INSTALLED: 455 kWINLET PRESSURE: 60 mbar(g)WORKING PRESSURE: Up to 15.5 bar(g)FLOW RATE: 0<956<1912Nm³/hAMBIENT TEMPERATURE: -10/+40 °C Screw biogas compressor for upgrading located in the Netherlands. Designed for classified Atex Zone 2 for indoor installation, air-cooled, completed with temperature control, heat recovery and controlled by PLC.

UVG110-France

BIOGAS COMPRESSOR UVG110 LOCATION: FRANCEFLUID: BiogasPOWER INSTALLED: 132 kWINLET PRESSURE: 150 mbar(g)WORKING PRESSURE: Up to 14 bar(g)FLOW RATE: 0<325<651Nm³/hAMBIENT TEMPERATURE: -20/+40 °C Screw biogas compressor for upgrading located in France. Designed for classified Atex Zone 2 for outdoor installation, air-cooled, completed with temperature control, heat recovery and controlled by PLC. It is equipped with electro-pneumatic by-pass system.

UVG110-France

BIOGAS COMPRESSOR UVG110 LOCATION: FRANCEFLUID: BiogasPOWER INSTALLED: 160 kWINLET PRESSURE: 100 mbar(g)WORKING PRESSURE: Up to 15.5 bar(g)FLOW RATE: 0<460<707 Nm³/hAMBIENT TEMPERATURE: -20/+40 °C Screw biogas compressor for upgrading located in France. Designed for classified Atex Zone 2 for outdoor installation, air-cooled, completed with heat recovery, temperature control and controlled by PLC. It is equipped with mechanical oil shaft seal & pressurized suction… Continue reading UVG110-France

UVG110-Swiss

BIOGAS COMPRESSOR UVG110 LOCATION: SWISSFLUID: BiogasPOWER INSTALLED: 132 kWINLET PRESSURE: 120 mbar(g)WORKING PRESSURE: Up to 15.5 bar(g)FLOW RATE: 0<297<593 Nm³/hAMBIENT TEMPERATURE: +3/+40 °C Screw biogas compressor for upgrading located in Swiss. Designed for classified Atex Zone 2 for indoor installation, water-cooled, completed with activated carbon column, temperature control, fine filtration and controlled by PLC.

Contact us

Write us for support or information