biogas compressors UVG315-BVG75 Italy

BIOGAS COMPRESSORS

UVG315/BVG75

LOCATION: ITALY
FLUID: Biogas 

UVG 315                                                                                                    
POWER INSTALLED:
 315 kW
INLET PRESSURE: 400 mbar(g)
WORKING PRESSURE: Up to 15.5 bar(g)
FLOW RATE: 0<1715<1827 Nm³/h
AMBIENT TEMPERATURE: +3/+40 °C

BVG 75                                                                                                             
POWER INSTALLED:
 75 kW
INLET PRESSURE: 500 mbar(g)
WORKING PRESSURE: Up to 4.5 bar(g)
FLOW RATE: 0<550<644 Nm³/h
AMBIENT TEMPERATURE: +3/+40 °C

 

Two Screw compressors in series for biogas upgrading located in Italy. The first unit supplies the biogas to the upgrading system, the second recirculates the remaining methane and carbon dioxide to obtain greater efficiency for its recovery through the upgrading system. Both compressors are open frame, installed inside container, designed for classificated Atex Zone 2, completed with heat recovery, fine filtration and temperature control.

[contact_form]

OTHER REFERENCES

Model UVG 132

France

Screw biogas compressor for upgrading located in France. Designed for classified Atex Zone 2 for outdoor installation. It is completed with heat recovery, temperature control, fine filtration, fully electrical by-pass system and controlled by PLC.
View more

Model BVG 160

USA

Screw biogas compressor for upgrading located in USA. Designed in compliance with north american standards, suitable for outdoor installation, air-cooled, completed with electro-pneumatic by-pass system, temperature control, fine filtration and controlled by PLC.
View more

Model ADI115-30

France

Double-stage reciprocating compressor for biomethane grid injection installed in France. Designed for classified Atex Zone 2 for outdoor installation, controlled by PLC and it is equipped with fully electrical by-pass system.
View more

Model ADI70-18.5

France

Double-stage reciprocating compressor for biomethane grid injection installed in France. Designed for classified Atex Zone 2 for outdoor installation. it is equipped with fully electrical by-pass system and controlled by PLC.
View more

Model UVG 160

France

Screw biogas compressor for upgrading located in France. Designed for classified Atex Zone 2 for outdoor installation. It is air-cooled,completed with heat recovery, temperature control, bleed valve for depressurization and controlled by PLC.
View more

Model UVG 500

Netherlands

Screw biogas compressor for upgrading located in the Netherlands. Designed for classified Atex Zone 2 for indoor installation. It is water-cooled,completed with heat recovery, temperature control, bleed valve for depressurization and controlled by PLC.
View more

Model UVG 250

France

Two single-stage compressors for upgrading located in France. Designed for classified Atex Zone 2 for outdoor installation. Equipped with fully electrical by-pass system, heat recovery, temperature control and controlled by PLC.
View more

Model ADI115-45

France

Double-stage reciprocating compressor for biomethane grid injection installed in France. Designed for classified Atex Zone 2 for outdoor installation. It is equipped with silencers, fully electrical by-pass system and controlled by PLC.
View more

Model UVG 200

France

Screw biogas compressor for upgrading located in France. Designed for classified Atex Zone 2 for outdoor installation, completed with bleed valve, heat recovery, temperature control, electro-pneumatic by pass valve and it is equipped with silencers.
View more

Model BVG 90

India

Two screw biogas compressors for upgrading located in India. Designed for classified Atex Zone 2 for outdoor installation, air-cooled, completed with bleed valve and controlled by PLC. It is equipped with electro-pneumatic by pass valve.
View more

Contact us

Write us for support or information