Wet gas compressor

BVG/UVG series

These wet gas compression and treatment stations are designed into an easy handling skid composed of an oil-injected rotary gas screw block, directly coupled to an electric motor through a flexible or magnetic coupling inverter controlled.
Based on the application and on the operating pressure required, our compressors can be classified in:
• BVG: available operating pressures from 3.0 bar(g) to 10.0 bar(g).
• UVG: available operating pressures from 8.0 bar(g) to 25.0 bar(g).

HOW IT WORKS
The wet gas is sucked through a suction filter acting also as a water separator with automatic condensate drain system, then the gas passes through a suction valve. All the components in contact with the gas are made in stainless steel or duly protected, due to the presence of H2S, CO2 and other aggressive contaminants into the gas. During the gas compression process, the oil is injected inside the rotary screw chamber to perform three main functions: lubrication, sealing and heat absorption. Working in a close circuit with a gas/oil receiver, oil is pressurized to flow through an oil cooler, then filtered before being injected again into the screw compression chamber.
The gas flows through the minimum pressure /no-return valve into a cooler and it is treated before leaving the package.

OPERATING PRESSURE
up to 25 bar(g)

FREE GAS DELIVERY
up to 6.000 Nm3/h

ADSORBED POWER
up to 710 kW

REFERENCES

Model UVG 132

France

Screw biogas compressor for upgrading located in France. Designed for classified Atex Zone 2 for outdoor installation. It is completed with heat recovery, temperature control, fine filtration, fully electrical by-pass system and controlled by PLC.
View more

Model BVG 160

USA

Screw biogas compressor for upgrading located in USA. Designed in compliance with north american standards, suitable for outdoor installation, air-cooled, completed with electro-pneumatic by-pass system, temperature control, fine filtration and controlled by PLC.
View more

Model ADI115-30

France

Double-stage reciprocating compressor for biomethane grid injection installed in France. Designed for classified Atex Zone 2 for outdoor installation, controlled by PLC and it is equipped with fully electrical by-pass system.
View more

Model ADI70-18.5

France

Double-stage reciprocating compressor for biomethane grid injection installed in France. Designed for classified Atex Zone 2 for outdoor installation. it is equipped with fully electrical by-pass system and controlled by PLC.
View more

Model UVG 160

France

Screw biogas compressor for upgrading located in France. Designed for classified Atex Zone 2 for outdoor installation. It is air-cooled,completed with heat recovery, temperature control, bleed valve for depressurization and controlled by PLC.
View more

Model UVG 500

Netherlands

Screw biogas compressor for upgrading located in the Netherlands. Designed for classified Atex Zone 2 for indoor installation. It is water-cooled,completed with heat recovery, temperature control, bleed valve for depressurization and controlled by PLC.
View more

Model UVG 250

France

Two single-stage compressors for upgrading located in France. Designed for classified Atex Zone 2 for outdoor installation. Equipped with fully electrical by-pass system, heat recovery, temperature control and controlled by PLC.
View more

Model ADI115-45

France

Double-stage reciprocating compressor for biomethane grid injection installed in France. Designed for classified Atex Zone 2 for outdoor installation. It is equipped with silencers, fully electrical by-pass system and controlled by PLC.
View more

Model UVG 200

France

Screw biogas compressor for upgrading located in France. Designed for classified Atex Zone 2 for outdoor installation, completed with bleed valve, heat recovery, temperature control, electro-pneumatic by pass valve and it is equipped with silencers.
View more

Model BVG 90

India

Two screw biogas compressors for upgrading located in India. Designed for classified Atex Zone 2 for outdoor installation, air-cooled, completed with bleed valve and controlled by PLC. It is equipped with electro-pneumatic by pass valve.
View more

OTHER PRODUCTS

VGE series

View more

VG series

View more

ADI70/115 series

View more

BVG/UVG series

View more

Contact us

Write us for support or information