BIOGAS COMPRESSOR
UVG160
LOCATION: FRANCE
FLUID: Biogas
POWER INSTALLED: 200 kW
INLET PRESSURE: 300 mbar(g)
WORKING PRESSURE: Up to 15 bar(g)
FLOW RATE: 0<550<1050 Nm³/h
AMBIENT TEMPERATURE: +3/+40 °C
Screw compressor water cooled, for biogas upgrading located in France. Designed for classificated Atex Zone 2 for indoor installation, completed with fine oil removal and controlled by PLC.
[contact_form]
OTHER REFERENCES
UVG 132
Germany
Screw biogas compressor for upgrading located in Germany. Designed for classified Atex Zone 2 for outdoor installation. It is air cooled and completed with fine filtration, temperature control, heat recovery, electro-pneumatic bypass valve and controlled by PLC.
The compressor is equipped with silencers (maximum noise level: 65 dB(A) at 10 meters).
VIEW MORE
UVG 132
USA
Screw biogas compressor for upgrading located in USA. Designed in compliance with ASME and UL standards (Class 1 Division 2) for outdoor installation. It is air cooled and equipped with temperature control, bleed valve for depressurization to vent and suction gas filter with automatic condensate drainer.
VIEW MORE
BVG 700
Brazil
Screw biogas compressor for upgrading located in Brazil. Designed in compliance with standards for the Brazilian market (INMETRO and NR10-12-13-17 standards) for indoor installation. It is water-cooled and completed with fine filtration, temperature control, electropneumatic by-pass system, and controlled by PLC.
VIEW MORE
UVG 315
Italy
Screw biogas compressor for upgrading located in Italy. Designed for classified Atex Zone 2 for outdoor installation. It is air cooled and completed with fine filtration, temperature control, heat recovery, electro-pneumatic bypass valve and controlled by PLC. The compressor is equipped with silencer (maximum noise level: 75 dB(A) at 1 meter).
VIEW MORE
UVG 160
Brazil
Two screw biogas compressors for upgrading located in Brazil. Designed in compliance with standards for the Brazilian market (INMETRO and NR10-12-13-17 standards) for outdoor installation. They are air-cooled and equipped with fine filtration, temperature control, electropneumatic by-pass system, and controlled by PLC.
VIEW MORE
Model UVG 200
USA
Screw biogas compressor for upgrading located in USA. Designed in compliance with north american standards, suitable for outdoor installation, air-cooled, completed with electro-pneumatic by-pass system and controlled by PLC.
VIEW MORE
UVG 22
France
Screw compressor for COâ‚‚ located in France. Designed for non-hazardous area for outdoor installation. It is air cooled and completed with fine filtration, electrical cabinet in the compressor skid, fully electrical by-pass system and controlled by PLC.
The compressor is equipped with silencers (maximum noise level: 74 dB(A) at 1 meter).
VIEW MORE
UVG 160
USA
Screw biogas compressor for upgrading located in USA. Designed in compliance with ASME and UL standards (Class 1 Division 2) for outdoor installation. It is air cooled and completed with fine filtration, temperature control, electro-pneumatic bypass valve and controlled by PLC.
VIEW MORE
ADI115-22
Czech Republic
Single stage reciprocating compressor for biomethane installed in Czech Republic. Designed for classified Atex Zone 2 for outdoor installation. It is air cooled and completed with electro-pneumatic by-pass system, fine filtration and controlled by PLC.
VIEW MORE
ADI115-30
Netherlands
Double stage reciprocating compressor installed in the Netherlands. Designed for classified Atex Zone 2 for outdoor installation. It is water cooled and completed with bleed valve for depressurization to vent, electro-pneumatic proportional bypass valve and controlled by PLC.
VIEW MORE