BIOGAS COMPRESSOR
VG15
LOCATION: MEXICO
FLUID: Dry natural gas
POWER INSTALLED: 15 kW
INLET PRESSURE: 0.6-2 bar(g)
WORKING PRESSURE: Up to 21 bar(g)
FLOW RATE: 0<70<75 Nm³/h
AMBIENT TEMPERATURE: -10/+40 °C
Screw dry natural gas compressor installed in a hydrogen production plant in Mexico. Designed in compliance with north american standards, suitable for outdoor installation, air-cooled, completed with fine filtration, mechanical by-pass valve and controlled by S1-20.
[contact_form]
OTHER REFERENCES
Model UVG 200
USA
Screw biogas compressor for upgrading located in USA. Designed in compliance with north american standards, suitable for outdoor installation, air-cooled, completed with electro-pneumatic by-pass system and controlled by PLC.
View more
UVG 22
France
Screw compressor for CO₂ located in France. Designed for non-hazardous area for outdoor installation. It is air cooled and completed with fine filtration, electrical cabinet in the compressor skid, fully electrical by-pass system and controlled by PLC.
The compressor is equipped with silencers (maximum noise level: 74 dB(A) at 1 meter).
View more
UVG 160
USA
Screw biogas compressor for upgrading located in USA. Designed in compliance with ASME and UL standards (Class 1 Division 2) for outdoor installation. It is air cooled and completed with fine filtration, temperature control, electro-pneumatic bypass valve and controlled by PLC.
View more
ADI115-22
Czech Republic
Single stage reciprocating compressor for biomethane installed in Czech Republic. Designed for classified Atex Zone 2 for outdoor installation. It is air cooled and completed with electro-pneumatic by-pass system, fine filtration and controlled by PLC.
View more
ADI115-30
Netherlands
Double stage reciprocating compressor installed in the Netherlands. Designed for classified Atex Zone 2 for outdoor installation. It is water cooled and completed with bleed valve for depressurization to vent, electro-pneumatic proportional bypass valve and controlled by PLC.
View more
UVG 650
Denamrk
Two screw compressors for biogas upgrading installed in Denmark. Each compressor is installed inside a dedicated 40' container. They are designed for classified ATEX Zone 2 for outdoor installation. The compressors are water-cooled and completed with heat recovery, temperature control, electropneumatic by-pass valve and are controlled by PLC.
View more
UVG 18.5
Germany
Screw biogas compressor for upgrading located in Germany. Designed for classified Atex Zone 2 for outdoor installation. It is air cooled and completed with fine filtration, mechanical bypass valve and controlled by HMI.
View more
VG 55
Germany
crew compressor for natural gas located in Germany. Designed for classified Atex Zone 2 for outdoor installation. It is air cooled and completed with fine filtration, electromechanical by-pass system and controlled by PLC.
View more
UVG 355
Italy
Screw compressor for biogas upgrading located in Italy. Designed for outdoor installation. It is water cooled and completed with temperature control, fully electrical by-pass system, fine filtration and controlled by PLC. It is equipped with silencers for reducing the noise level to 75 dB@ 10m.
View more
UVG132/BVG30
Lithuania
Two screw compressors for biogas upgrading located in Lithuania. The first unit supplies the biogas to the upgrading system, the second recirculates the remaining methane and carbon dioxide to obtain greater efficiency for its recovery through the upgrading system. Both compressors are open frame, installed inside container, designed for classificated Atex Zone 2, equipped with with electro-pneumatic by-pass system, fine filtration, temperature control and controlled by PLC.
View more