CO2 COMPRESSOR UVG22 LOCATION: FRANCEFLUID: CO₂POWER INSTALLED: 30 kWINLET PRESSURE: 0 bar(g)WORKING PRESSURE: Up to 23 bar(g)FLOW RATE: 0<35<68 Nm³/hAMBIENT TEMPERATURE: -10/+40 °C Screw compressor for CO₂ located in France. Designed for non-hazardous area for outdoor installation. It is air cooled and completed with fine filtration, electrical cabinet in the compressor skid, fully electrical by-pass… Continue reading UVG22-France
Application: CO2 recovery
UVG132/BVG30-Lithuania
BIOGAS COMPRESSOR / CO2 RECOVERY UVG132/ BVG30 UVG 132 LOCATION: LITHUANIAFLUID: BiogasPOWER INSTALLED: 160 kWINLET PRESSURE: 0,1 bar(g)WORKING PRESSURE: Up to 12 bar(g)FLOW RATE: 0<390<780 Nm3/hAMBIENT TEMPERATURE: +3/+40 °C BVG 30 LOCATION: LITHUANIAFLUID: CO2POWER INSTALLED: 45 kWINLET PRESSURE: 0,5 bar(g)WORKING PRESSURE: Up to 4 bar(g)FLOW RATE: 0<150<300 Nm3/hAMBIENT TEMPERATURE: +3/+40 °C Two screw compressors… Continue reading UVG132/BVG30-Lithuania
UVG90-Italy
CO2 COMPRESSOR UVG90 LOCATION: ITALYFLUID: CO2POWER INSTALLED: 110 kWINLET PRESSURE: 1 bar(g)WORKING PRESSURE: Up to 15 bar(g)FLOW RATE: 0<328<532 Nm³/hAMBIENT TEMPERATURE: -20/+40 °C Screw biogas compressor for CO2 destined for the Italian market. Designed for installation in safe area outdoors. It is air-cooled and equipped with heat recovery, temperature control, fine filtration and controlled by… Continue reading UVG90-Italy
SSG series
SSG series These wet or dry gas compression and treatment stations are designed into an easy handling skid composed of a two stage oil-injected rotary gas screw block, directly coupled to an electric motor through a flexible coupling inverter controlled. Adicomp is pleased to announce that it has developed and produced, together with its parent… Continue reading SSG series
VG200-Kazakistan
CO2 COMPRESSOR VG200 LOCATION: KazakistanFLUID: CO2POWER INSTALLED: 220 kWINLET PRESSURE: 0.18 bar(g)MAXIMUM OPERATING PRESSURE: 7 bar(g)FLOW RATE: 0<3000 Nm³/hAMBIENT TEMPERATURE: +3/+40 °C Two screw compressors for carbon dioxide application for the chemical industry. The compressors are water-cooled and installed indoors.