Main Features
- Wide compression range: PB | UVG
- Inlet and/or outlet gas treatment system
- Complete management and control of the system with PLC and HMI interface
Reach Out to Us
We're here to help. Please choose one of the options below to get in touch with us!
Overview
Biomethane, produced through upgrading processes, is chemically comparable to natural gas, sharing its main physico-chemical characteristics. Thanks to this compatibility, it can be used in the same applications as fossil gas such as mobility, energy generation, and industrial uses while utilizing existing infrastructure for transport and distribution. This makes biomethane a particularly advantageous alternative both economically, due to lower required investments, and environmentally, by contributing to emission reductions and the valorization of organic waste.
Adicomp offers two product ranges for this purpose: screw and piston compressors capable of reaching pressures up to 100 bar(g), thus meeting the pressure requirements of regulations in various countries. At the core of the skid is a piston or screw compressor designed for continuous operation, equipped with multiple cylinders depending on the required performance.
Related Products
.jpg?format=pjpeg&width=100&quality=10)
Other Applications
Biogas upgrading
Adicomp provides efficient, tailor-made biogas upgrading compressors, ideal for membrane systems, chemical scrubbing, or PSA applications.
Wellhead gas
Mature gas wells are found across the globe, and many are shut down and abandoned because the pressure at the wellhead is too low to allow for efficient gas recovery.
Hydrogen & Syngas
Adicomp offers reliable plug & play hydrogen compressors, ideal for industrial applications and equipped with gas treatment systems.
Power generation (microturbines feeding)
Adicomp supplies compressed and treated gas to microturbines to maximize their productivity, removing contaminants such as H₂S.
Power generation (gas engines feeding)
Adicomp provides solutions for gas engines, including gas treatments, to ensure maximum efficiency and eliminate failures.
Power generation (turbines feeding)
In the turbine sector, Adicomp offers a wide range of solutions that enable the use of gases from various sources for the generation of electrical and thermal energy, including in cogeneration systems.
CO₂ Recovery
Adicomp’s plug & play solutions for compressing and purifying CO2, ideal for food-grade applications and emission reduction.
Learn about our Case Studies
ADI115-22-Czech Republic
Single-stage compressor for biomethane, located in Czech Republic. ATEX Zone 2, with electropneumatic and PLC-controlled bypass system.
ADI115-30-Poland
Single-stage natural gas compressor, located in Poland. ATEX Zone 2, with fully electric and PLC-controlled bypass system.
ADI115-45-France
Two-stage biomethane compressor located in France. Classified in ATEX Zone 2, equipped with silencers and controlled by PLC.
ADI115-55-Canada
Three-stage piston compressor for biomethane in Canada. Water-cooled, designed according to CSA, ASME and UL standards.
ADI70-18.5-France
Two-stage compressor for biomethane, located in France. ATEX Zone 2, with fully electric and PLC-controlled bypass system.