BVG/UVG Series
BVG/UVG 75<700
series
and applications
This compressor series has been specifically designed for feeding biogas upgrading systems. Their role is to increase the inlet gas pressure while simultaneously improving gas quality, ensuring a more efficient and reliable process.
- Pressure swing adsorption
- Membranes technology
- Turbines feeding
- Gas engine feeding
- Boiler feeding
- Water washing scrubbing
- CO2 recirculation
- Vapor recovery
BVG/UVG 22>90
series
and applications
This compressor series has been specifically designed for feeding biogas upgrading systems. Their role is to increase the inlet gas pressure while simultaneously improving gas quality, ensuring a more efficient and reliable process.
- Pressure swing adsorption
- Membranes technology
- Turbines feeding
- Gas engine feeding
- Boiler feeding
- Water washing scrubbing
- CO2 recirculation
- Vapor recovery
HOW IT WORKS
1
Wet gas is drawn through a water separator filter with automatic condensate drainage, then passes through a suction valve for further treatment.
2
Due to the presence of H2S, CO2, or other aggressive contaminants in the gas, all components in contact with it are made of stainless steel or suitably protected.
3
During the gas compression process, oil is injected into the pumping unit to perform three main functions: lubrication, sealing and heat absorption.
4
Operating in a closed circuit with a gas/oil reservoir, the oil is pressurized to flow through an oil cooler, then filtered before being re-injected into the screw compression chamber.
5
The gas flows through a minimum pressure/non-return valve, then towards a cooler where impurities are removed, before being sent out and leaving the package in optimal conditions.
INLET PRESSURE
Up to
14.5 psi(g)
OPERATING PRESSURE
Up to
363
psi(g)
FREE GAS DELIVERY
Up to
2800 SCFM
ADSORBED POWER
Up to
939
Hp
BVG-UVG Series – Codes & Standards
EU
- Classification of hazardous areas: ATEX Zone II
- Pressure vessel code compliance: PED
- Electrical Code Compliance: ISO 60079
- Certified manufactoring organization: ISO 9001:2015 – ISO 14001:2015 – ISO 45001:2018
US
- Hazardous Area Classification: Class 1, Div 2 as defined per NEC, NFPA70
- Pressure Vessel Code Compliance: ASME
- Electrical Code Compliance: UL/Control panels and assemblies
- Certified manufactoring organization: ISO 9001:2015 – ISO 14001:2015 – ISO 45001:2018
- UL 508A, Standard for Industrial Control Panels
- UL 698A, Standard for Industrial Control Panels Relating to Hazardous (Classified) Locations
- NFPA 70 National Electric Code
- ASME B31.3 – Process Pipes.
CA
- Hazardous Area Classification: Class 1, Div 2 as defined per NEC, NFPA70
- Pressure Vessel Code Compliance: ASME -CRN
- Electrical Code Compliance: UL/Control panels and assemblies
- Certified manufactoring organization: ISO 9001:2015 – ISO 14001:2015 – ISO 45001:2018
- UL 508A, Standard for Industrial Control Panels
- UL 698A, Standard for Industrial Control Panels Relating to Hazardous (Classified) Locations
- NFPA 70 National Electric Code
- ASME B31.3 – Process Pipes.
BR
- Classification of hazardous areas: ATEX Zone II
- Pressure Vessel Code Compliance: ASME – NR13
- Electrical code compliance: ISO 60079 – NR10 (Electrical panels and assemblies)
- Certified manufactoring organization: ISO 9001:2015 – ISO 14001:2015 – ISO 45001:2018
- ASME B31.3 – Process Pipes.
IN
- Hazardous Area Classification: ATEX Zone II (HEAVY)
- Pressure Vessel Code Compliance: ASME
- Electrical code compliance: ISO 60079 (Electrical panels and assemblies)
- Certified manufactoring organization: ISO 9001:2015 – ISO 14001:2015 – ISO 45001:2018
- ASME B31.3 – Process Pipes.
Other products
Our applications
By following the principles of the circular economy and producing responsibly, a waste can become a resource thus acquiring a new life. Hoping to create a more ecological and sustainable reality, Adicomp is proud to contribute to the development of solutions using renewable gases such as biogas, biomethane, and hydrogen.
