BIOGAS COMPRESSOR
UVG400
LOCATION: USA
FLUID: Biogas
POWER INSTALLED: 480 kW (x2)
INLET PRESSURE: 70 mbar(g)
WORKING PRESSURE: Up to 16.5 bar(g)
FLOW RATE: 0<1103<2205 Nm³/h
AMBIENT TEMPERATURE: -25/+40 °C
Two screw compressors for biogas upgrading located in USA and designed in compliance with US standards. It is suitable for outdoor installation, air-cooled, equipped with suction heat exchanger, post-compression treatment, electromechanical by-pass system and controlled by PLC.
[contact_form]
OTHER REFERENCES
Model UVG315/VG250
Spain
Two screw compressors for biogas upgrading installed inside a container (40’) for a total flowrate of 3800 Nm3/h. One screw compressor for biomethane grid injection, in compliance with the Spain requirements for the GRFD. They are designed in compliance with the European standards for classified Atex zone 2, water-cooled, with outlet gas temperature control, fine filtration and remote control by PLC.
View more
Model ADLR9-45
Turkey
Two of five three stages reciprocating compressors for wellhead gas. Engineered with gas engine and local control panel equipped with PLC and suitable for classified area zone 2. Designed for outdoor installation and with by-pass valve for flow rate regulation.
View more
Model UVG 90
France
Screw biogas compressor for upgrading located in France. Designed for classified Atex Zone 2 for outdoor installation, air-cooled, completed with temperature control, heat recovery and controlled by PLC. It is equipped with fully electrical by-pass system.
View more
Model UVG315
Italy
Screw biogas compressor for upgrading located in Italy. Designed for classified Atex Zone 2 for indoor installation, water-cooled, completed with temperature control, fine filtration and controlled by PLC.
View more
Model UVG355
Netherlands
Screw biogas compressor for upgrading located in the Netherlands. Designed for classified Atex Zone 2 for indoor installation, air-cooled, completed with temperature control, heat recovery and controlled by PLC.
View more
Model UVG110
France
Screw biogas compressor for upgrading located in France. Designed for classified Atex Zone 2 for outdoor installation, air-cooled, completed with temperature control, heat recovery and controlled by PLC. It is equipped with electro-pneumatic by-pass system.
View more
Model UVG110
France
Screw biogas compressor for upgrading located in France. Designed for classified Atex Zone 2 for indoor installation, air-cooled, completed with heat recovery, temperature control and controlled by PLC. It is equipped with mechanical oil shaft seal & pressurized suction condensate drainer.
View more
Model UVG110
Swiss
Screw biogas compressor for upgrading located in Swiss. Designed for classified Atex Zone 2 for indoor installation, water-cooled, completed with activated carbon column, temperature control, fine filtration and controlled by PLC.
View more
Model UVG 200
USA
Screw biogas compressor for upgrading located in USA. Designed in compliance with north american standards, suitable for outdoor installation, air-cooled, completed with electro-pneumatic by-pass system and controlled by PLC.
View more
Model BVG45
Turkey
Screw biogas compressor for upgrading located in Turkey. Designed for classified Atex Zone 2 for outdoor installation, air-cooled, completed with electro-pneumatic by-pass valve, heat recovery and controlled by PLC.
View more