BVG160

Two screw compressors for biomethane grid injection located in UK. Designed for classified Atex Zone 2 for outdoor installation. They are air cooled and completed with fine filtration, temperature control, heat recovery, electro-pneumatic by-pass system and controlled by PLC.

Two screw biogas compressors for upgrading located in Spain. Designed for classified Atex Zone 2 for outdoor installation. They are air cooled and completed with fine filtration, temperature control, heat recovery, fully electrical by-pass system and controlled by PLC.

Screw compressor for natural gas installed in the USA to feed Capstone microturbines. Designed in compliance with ASME and UL standards (Class 1 Division 2) for indoor installation. It is air cooled and completed with medium filtration, mechanical by-pass valve and controlled by PLC.

Two screw compressors for biogas upgrading located in USA and designed in compliance with US standards. It is suitable for outdoor installation, air-cooled, equipped with suction heat exchanger, post-compression treatment, electromechanical by-pass system, silenciers and controlled by PLC.

Screw biogas compressor for upgrading located in Lithuania. Designed for classified Atex Zone 2 for indoor installation. It is water cooled and completed with fine filtration, temperature control, electro-pneumatic by-pass system and controlled by PLC. The compressor is installed inside a container supplied by customer.

Screw biogas compressor for upgrading located in France. Designed for classified Atex Zone 2 for outdoor installation. It is air cooled and completed with medium filtration, temperature control, heat recovery and controlled by PLC.

Four compressors located in France. Two are screw compressors for 1st stage of biomethane. They are air-cooled and equipped with fine filtration, a bleed valve for depressurization, an electro-pneumatic bypass system, and are controlled by a PLC. The other two are two-stages reciprocating compressors for the 2nd stage for biomethane grid injection. They are also air-cooled and equipped with fine filtration, an electro-pneumatic bypass system, silencers, and are controlled by a PLC. All four units are designed for ATEX Zone 2 area classification and suitable for outdoor installation (14°F to 104°F).

New series screw biogas compressor for upgrading, destined for the Spanish market. Designed for classified Atex Zone 2 for outdoor installation. It is air cooled and completed with fine filtration, temperature control, heat recovery, bleed valve and controlled by PLC.

Screw biogas compressor for upgrading located in Germany. Designed for classified Atex Zone 2 for outdoor installation. It is air cooled and completed with fine filtration, temperature control, heat recovery, electro-pneumatic bypass valve and controlled by PLC. The compressor is equipped with silencers (maximum noise level: 65 dB(A) at 10 meters).

Screw biogas compressor for upgrading located in USA. Designed in compliance with ASME and UL standards (Class 1 Division 2) for outdoor installation. It is air cooled and equipped with temperature control, bleed valve for depressurization to vent and suction gas filter with automatic condensate drainer.