BIOGAS COMPRESSOR

BVG155

LOCATION: Cavenago, Italy
POWER: 100 hp each
INLET PRESSURE: 0,3-1,5 psi(g)
WORKING PRESSURE: 108,8 psi(g)
MAX FLOW RATE: 280 SCFM
AMBIENT TEMPERATURE: -4/+104 °F

Landfill gas compressor for cogeneration plant, where two units BVG55 are installed in a single skid inside a sound-proof canopy including also a refrigeration dryer.
These compressors supply seven Capstone microturbines CR65.

[contact_form]

OTHER REFERENCES

UVG 315

Italy

Screw biogas compressor for upgrading located in Italy. Designed for classified Atex Zone 2 for outdoor installation. It is air cooled and completed with fine filtration, temperature control, heat recovery, electro-pneumatic bypass valve and controlled by PLC. The compressor is equipped with silencer (maximum noise level: 75 dB(A) at 1 meter).
VIEW MORE

UVG 160

Brazil

Two screw biogas compressors for upgrading located in Brazil. Designed in compliance with standards for the Brazilian market (INMETRO and NR10-12-13-17 standards) for outdoor installation. They are air-cooled and equipped with fine filtration, temperature control, electropneumatic by-pass system, and controlled by PLC.
VIEW MORE

Model UVG 200

USA

Screw biogas compressor for upgrading located in USA. Designed in compliance with north american standards, suitable for outdoor installation, air-cooled, completed with electro-pneumatic by-pass system and controlled by PLC.
VIEW MORE

UVG 22

France

Screw compressor for COâ‚‚ located in France. Designed for non-hazardous area for outdoor installation. It is air cooled and completed with fine filtration, electrical cabinet in the compressor skid, fully electrical by-pass system and controlled by PLC. The compressor is equipped with silencers (maximum noise level: 74 dB(A) at 1 meter).
VIEW MORE

UVG 160

USA

Screw biogas compressor for upgrading located in USA. Designed in compliance with ASME and UL standards (Class 1 Division 2) for outdoor installation. It is air cooled and completed with fine filtration, temperature control, electro-pneumatic bypass valve and controlled by PLC.
VIEW MORE

ADI115-22

Czech Republic

Single stage reciprocating compressor for biomethane installed in Czech Republic. Designed for classified Atex Zone 2 for outdoor installation. It is air cooled and completed with electro-pneumatic by-pass system, fine filtration and controlled by PLC.
VIEW MORE

ADI115-30

Netherlands

Double stage reciprocating compressor installed in the Netherlands. Designed for classified Atex Zone 2 for outdoor installation. It is water cooled and completed with bleed valve for depressurization to vent, electro-pneumatic proportional bypass valve and controlled by PLC.
VIEW MORE

UVG 650

Denmark

Two screw compressors for biogas upgrading installed in Denmark. Each compressor is installed inside a dedicated 40' container. They are designed for classified ATEX Zone 2 for outdoor installation. The compressors are water-cooled and completed with heat recovery, temperature control, electropneumatic by-pass valve, and are controlled by PLC.
VIEW MORE

UVG 18.5

Germany

Screw biogas compressor for upgrading located in Germany. Designed for classified Atex Zone 2 for outdoor installation. It is air cooled and completed with fine filtration, mechanical bypass valve and controlled by HMI.
VIEW MORE

VG 55

Germany

Screw compressor for natural gas located in Germany. Designed for classified Atex Zone 2 for outdoor installation. It is air cooled and completed with fine filtration, electromechanical by-pass system and controlled by PLC.
VIEW MORE

CONTACT US

Write us for support or information