BIOMETHANE COMPRESSOR / RNG GRID INJECTION UVG75/ ADI115 2x UVG 75 LOCATION: FRANCEFLUID: BiomethanePOWER INSTALLED: 125 hpINLET PRESSURE: 2,9 psi(g)WORKING PRESSURE: Up to 167 psi(g)FLOW RATE: 0<150<299 SCFMAMBIENT TEMPERATURE: 14/+104 °F 2x ADI 115 LOCATION: FRANCEFLUID: BiomethanePOWER INSTALLED: 75 hpINLET PRESSURE: 160 psi(g)WORKING PRESSURE: Up to 1160 psi(g)FLOW RATE: 0<202<299 Nm3/hAMBIENT TEMPERATURE: 14/+104 °F… Continue reading UVG75/ADI115-France
Line: ADI115
ADI115-22-Czech Republic
BIOMETHANE BOOSTER ADI115-22 LOCATION: CZECH REPUBLICFLUID: BiomethanePOWER INSTALLED: 40 hp INLET PRESSURE: 130,5 psi(g)WORKING PRESSURE: Up to 363 psi(g)FLOW RATE: 0<109<218 SCFMAMBIENT TEMPERATURE: -4/+104 °F Single stage reciprocating compressor for biomethane installed in Czech Republic. Designed for classified Atex Zone 2 for outdoor installation. It is air cooled and completed with electro-pneumatic by-pass system, fine filtration and controlled by PLC.
ADI115-30 Netherlands
NATURAL GAS COMPRESSOR ADI115-30 LOCATION: NETHERLANDSFLUID: Natural gasPOWER INSTALLED: 60 hp INLET PRESSURE: 44 psi(g)WORKING PRESSURE: Up to 363 psi(g)FLOW RATE: 0<93<187 SCFMAMBIENT TEMPERATURE: -4/+104 °F Double stage reciprocating compressor installed in the Netherlands. Designed for classified Atex Zone 2 for outdoor installation. It is water cooled and completed with bleed valve for depressurization to vent, electro-pneumatic proportional bypass valve and controlled… Continue reading ADI115-30 Netherlands
UVG132/BVG30-Lithuania
BIOGAS COMPRESSOR / CO2 RECOVERY UVG132/ BVG30 UVG 132 LOCATION: LITHUANIAFLUID: BiogasPOWER INSTALLED: 220 hpINLET PRESSURE: 1,4 psi(g)WORKING PRESSURE: Up to 174 psi(g)FLOW RATE: 0<243<486 SCFMAMBIENT TEMPERATURE: +37,4/+104 °F BVG 30 LOCATION: LITHUANIAFLUID: CO2POWER INSTALLED: 60 hpINLET PRESSURE: 7,6 psi(g)WORKING PRESSURE: Up to 58 psi(g)FLOW RATE: 0<93<187 SCFMAMBIENT TEMPERATURE: +37,4/+104 °F Two screw compressors… Continue reading UVG132/BVG30-Lithuania
UVG315/ADI115-France
BIOGAS COMPRESSOR / RNG GRID INJECTION UVG315/ ADI115 UVG 315 LOCATION: FRANCEFLUID: BiogasPOWER INSTALLED: 550 hpINLET PRESSURE: 2,2 psi(g)WORKING PRESSURE: Up to 232 psi(g)FLOW RATE: 0<558<1117 SCFMAMBIENT TEMPERATURE: 14/+104 °F ADI 115 LOCATION: FRANCEFLUID: BiomethanePOWER INSTALLED: 100 hpINLET PRESSURE: 116<232 psi(g)WORKING PRESSURE: Up to 1015,3 psi(g)FLOW RATE: 0<271<358 SCFMAMBIENT TEMPERATURE: 14/+104 °F Two compressors… Continue reading UVG315/ADI115-France
ADI115-30-Poland
BIOMETHANE BOOSTER ADI115-30 LOCATION: PolandFLUID: Natural gasPOWER INSTALLED: 60 hpINLET PRESSURE: 261 psi(g)WORKING PRESSURE: Up to 326 psi(g)FLOW RATE: 0<1300<1620 SCFMAMBIENT TEMPERATURE: -4/+104 °F Single-stage reciprocating compressor for natural gas installed in Poland. Designed for classified Atex Zone 2. It is air cooled and completed with fine filtration and electropneumatic by-pass valve. The electrical cabinet is designed for outdoor installation and… Continue reading ADI115-30-Poland
ADI115-30-France
BIOMETHANE BOOSTER ADI115-30 LOCATION: FRANCEFLUID: BiomethanePOWER INSTALLED: 50 HpINLET PRESSURE: 174 psi(g)WORKING PRESSURE: Up to 982 psi(g)FLOW RATE: 0<93<187 Nm³/hAMBIENT TEMPERATURE: +14/+104 °F Double-stage reciprocating compressor for biomethane grid injection installed in France. Designed for classified Atex Zone 2 for outdoor installation, controlled by PLC and it is equipped with fully electrical by-pass system.
ADI70-18.5-France
BIOMETHANE BOOSTER ADI70-18.5 LOCATION: FRANCEFLUID: BiomethanePOWER INSTALLED: 30 HpINLET PRESSURE: 174 psi(g)WORKING PRESSURE: Up to 768,7 psi(g)FLOW RATE: 0<34<69 SCFMAMBIENT TEMPERATURE: +14/+104 °F Double-stage reciprocating compressor for biomethane grid injection installed in France. Designed for classified Atex Zone 2 for outdoor installation. it is equipped with fully electrical by-pass system and controlled by PLC.
ADI115-45-France
BIOMETHANE BOOSTER ADI115-45 LOCATION: FRANCEFLUID: BiomethanePOWER INSTALLED: 75 hpINLET PRESSURE: 174 psi(g)WORKING PRESSURE: Up to 1160,3 psi(g)FLOW RATE: 0<91<181 SCFMAMBIENT TEMPERATURE: +14/+104 °F Double-stage reciprocating compressor for biomethane grid injection installed in France. Designed for classified Atex Zone 2 for outdoor installation. It is equipped with silencers, fully electrical by-pass system and controlled by PLC.
ADI115-55-Canada
BIOMETHANE BOOSTER ADI115-55 LOCATION: CANADAFLUID: BiomethanePOWER INSTALLED: 100 hpINLET PRESSURE: 725,2 psi(g)WORKING PRESSURE: Up to 435,1 psi(g)FLOW RATE: 0<90<181 SCFMAMBIENT TEMPERATURE: +37,4/+104 °F Three-stages oil-free reciprocating compressor for biomethane grid injection installed in Canada. Designed in compliance with CSA, ASME and UL standards, water-cooled, suitable for indoor installation, equipped with electro-pneumatic by-pass system, temperature control and controlled by PLC.