BIOGAS COMPRESSOR

UVG355

LOCATION: ITALY
FLUID: Biogas
POWER INSTALLED: 610 hp
INLET PRESSURE: 2,5 psi(g)
WORKING PRESSURE: Up to 203 psi(g)
FLOW RATE: 0<655<1310 SCFM
AMBIENT TEMPERATURE: 14/+104 掳F

Screw compressor for biogas upgrading located in Italy. Designed for outdoor installation. It is water cooled and completed with temperature control, fully electrical by-pass system, fine filtration and controlled by PLC. It is equipped with silencers for reducing the noise level to 75 dB@ 10m.

[contact_form]

OTHER REFERENCES

UVG 315

Italy

Screw biogas compressor for upgrading located in Italy. Designed for classified Atex Zone 2 for outdoor installation. It is air cooled and completed with fine filtration, temperature control, heat recovery, electro-pneumatic bypass valve and controlled by PLC. The compressor is equipped with silencer (maximum noise level: 75 dB(A) at 1 meter).
Ver m醩

UVG 160

Brazil

Two screw biogas compressors for upgrading located in Brazil. Designed in compliance with standards for the Brazilian market (INMETRO and NR10-12-13-17 standards) for outdoor installation. They are air-cooled and equipped with fine filtration, temperature control, electropneumatic by-pass system, and controlled by PLC.
Ver m醩

Model UVG 200

USA

Screw biogas compressor for upgrading located in USA. Designed in compliance with north american standards, suitable for outdoor installation, air-cooled, completed with electro-pneumatic by-pass system and controlled by PLC.
Ver m醩

UVG 22

France

Screw compressor for CO鈧 located in France. Designed for non-hazardous area for outdoor installation. It is air cooled and completed with fine filtration, electrical cabinet in the compressor skid, fully electrical by-pass system and controlled by PLC. The compressor is equipped with silencers (maximum noise level: 74 dB(A) at 1 meter).
Ver m醩

UVG 160

USA

Screw biogas compressor for upgrading located in USA. Designed in compliance with ASME and UL standards (Class 1 Division 2) for outdoor installation. It is air cooled and completed with fine filtration, temperature control, electro-pneumatic bypass valve and controlled by PLC.
Ver m醩

ADI115-22

Czech Republic

Single stage reciprocating compressor for biomethane installed in Czech Republic. Designed for classified Atex Zone 2 for outdoor installation. It is air cooled and completed with electro-pneumatic by-pass system, fine filtration and controlled by PLC.
Ver m醩

ADI115-30

Netherlands

Double stage reciprocating compressor installed in the Netherlands. Designed for classified Atex Zone 2 for outdoor installation. It is water cooled and completed with bleed valve for depressurization to vent, electro-pneumatic proportional bypass valve and controlled by PLC.
Ver m醩

UVG 650

Denmark

Two screw compressors for biogas upgrading installed in Denmark. Each compressor is installed inside a dedicated 40' container. They are designed for classified ATEX Zone 2 for outdoor installation. The compressors are water-cooled and completed with heat recovery, temperature control, electropneumatic by-pass valve, and are controlled by PLC.
Ver m醩

UVG 18.5

Germany

Screw biogas compressor for upgrading located in Germany. Designed for classified Atex Zone 2 for outdoor installation. It is air cooled and completed with fine filtration, mechanical bypass valve and controlled by HMI.
Ver m醩

VG 55

Germany

Screw compressor for natural gas located in Germany. Designed for classified Atex Zone 2 for outdoor installation. It is air cooled and completed with fine filtration, electromechanical by-pass system and controlled by PLC.
Ver m醩

CONT脕CTANOS

Escr铆benos para soporte o informaci贸n