BIOGAS COMPRESSORS

UVG160/BVG75

LOCATION: ITALY
FLUID: Biogas

UVG 160
POWER INSTALLED: 200 kW (x3)
INLET PRESSURE: 400 mbar(g)
WORKING PRESSURE: Up to 12.3 bar(g)
FLOW RATE: 0<540<1080 Nm³/h
AMBIENT TEMPERATURE: -10/+40 °C

BVG 75
POWER INSTALLED: 75 kW (x2)
INLET PRESSURE: 500 mbar(g)
WORKING PRESSURE: Up to 4 bar(g)
FLOW RATE: 0<382<763 Nm³/h
AMBIENT TEMPERATURE: -10/+40 °C

Five screw compressors for biogas upgrading located in Italy. Three of them provides the biogas to the upgrading system, instead two of them recirculates the remaining methane and carbon dioxide to achieve greater efficiency for its recovery through the upgrade system. All compressors are designed for classificated Atex Zone 2, completed with fine filtration and temperature control.

ABOUT BVG/UVG SERIES

[contact_form]

OTHER REFERENCES

UVG75/ADI115

France

Four compressors located in France. Two are screw compressors for 1st stage of biomethane. They are air-cooled and equipped with fine filtration, a bleed valve for depressurization, an electro-pneumatic bypass system, and are controlled by a PLC. The other two are two-stages reciprocating compressors for the 2nd stage for biomethane grid injection. They are also air-cooled and equipped with fine filtration, an electro-pneumatic bypass system, silencers, and are controlled by a PLC. All four units are designed for ATEX Zone 2 area classification and suitable for outdoor installation (14°F to 104°F).

Ver m�s

UVG 55

Spain

New series screw biogas compressor for upgrading, destined for the Spanish market. Designed for classified Atex Zone 2 for outdoor installation. It is air cooled and completed with fine filtration, temperature control, heat recovery, bleed valve and controlled by PLC.

Ver m�s

UVG 132

Germany

Screw biogas compressor for upgrading located in Germany. Designed for classified Atex Zone 2 for outdoor installation. It is air cooled and completed with fine filtration, temperature control, heat recovery, electro-pneumatic bypass valve and controlled by PLC. The compressor is equipped with silencers (maximum noise level: 65 dB(A) at 10 meters).

Ver m�s

UVG 132

USA

Screw biogas compressor for upgrading located in USA. Designed in compliance with ASME and UL standards (Class 1 Division 2) for outdoor installation. It is air cooled and equipped with temperature control, bleed valve for depressurization to vent and suction gas filter with automatic condensate drainer.

Ver m�s

BVG 700

Brazil

Screw biogas compressor for upgrading located in Brazil. Designed in compliance with standards for the Brazilian market (INMETRO and NR10-12-13-17 standards) for indoor installation. It is water-cooled and completed with fine filtration, temperature control, electropneumatic by-pass system, and controlled by PLC.

Ver m�s

UVG 315

Italy

Screw biogas compressor for upgrading located in Italy. Designed for classified Atex Zone 2 for outdoor installation. It is air cooled and completed with fine filtration, temperature control, heat recovery, electro-pneumatic bypass valve and controlled by PLC. The compressor is equipped with silencer (maximum noise level: 75 dB(A) at 1 meter).

Ver m�s

UVG 160

Brazil

Two screw biogas compressors for upgrading located in Brazil. Designed in compliance with standards for the Brazilian market (INMETRO and NR10-12-13-17 standards) for outdoor installation. They are air-cooled and equipped with fine filtration, temperature control, electropneumatic by-pass system, and controlled by PLC.

Ver m�s

Model UVG 200

USA

Screw biogas compressor for upgrading located in USA. Designed in compliance with north american standards, suitable for outdoor installation, air-cooled, completed with electro-pneumatic by-pass system and controlled by PLC.

Ver m�s