BIOGAS COMPRESSOR / CO2 RECOVERY
UVG132/ BVG30
UVG 132
LOCATION: LITHUANIA
FLUID: Biogas
POWER INSTALLED: 220 hp
INLET PRESSURE: 1,4 psi(g)
WORKING PRESSURE: Up to 174 psi(g)
FLOW RATE: 0<243<486 SCFM
AMBIENT TEMPERATURE: +37,4/+104 掳F
BVG 30
LOCATION: LITHUANIA
FLUID: CO2
POWER INSTALLED: 60 hp
INLET PRESSURE: 7,6 psi(g)
WORKING PRESSURE: Up to 58 psi(g)
FLOW RATE: 0<93<187 SCFM
AMBIENT TEMPERATURE: +37,4/+104 掳F
Two screw compressors for biogas upgrading located in Lithuania. The first unit supplies the biogas to the upgrading system, the second recirculates the remaining methane and carbon dioxide to obtain greater efficiency for its recovery through the upgrading system. Both compressors are open frame, installed inside container, designed for classificated Atex Zone 2, equipped with with electro-pneumatic by-pass system, fine filtration, temperature control and controlled by PLC.
[contact_form]
OTHER REFERENCES
UVG 90
France
Screw biogas compressor for upgrading located in France. Designed for classified Atex Zone 2 for outdoor installation. It is air cooled and completed with medium filtration, temperature control, heat recovery and controlled by PLC.
Ver m醩
UVG75/ADI115
France
Four compressors located in France. Two are screw compressors for 1st stage of biomethane. They are air-cooled and equipped with fine filtration, a bleed valve for depressurization, an electro-pneumatic bypass system, and are controlled by a PLC. The other two are two-stages reciprocating compressors for the 2nd stage for biomethane grid injection. They are also air-cooled and equipped with fine filtration, an electro-pneumatic bypass system, silencers, and are controlled by a PLC. All four units are designed for ATEX Zone 2 area classification and suitable for outdoor installation (14掳F to 104掳F).
Ver m醩
UVG 55
Spain
New series screw biogas compressor for upgrading, destined for the Spanish market. Designed for classified Atex Zone 2 for outdoor installation. It is air cooled and completed with fine filtration, temperature control, heat recovery, bleed valve and controlled by PLC.
Ver m醩
UVG 132
Germany
Screw biogas compressor for upgrading located in Germany. Designed for classified Atex Zone 2 for outdoor installation. It is air cooled and completed with fine filtration, temperature control, heat recovery, electro-pneumatic bypass valve and controlled by PLC. The compressor is equipped with silencers (maximum noise level: 65 dB(A) at 10 meters).
Ver m醩
UVG 132
USA
Screw biogas compressor for upgrading located in USA. Designed in compliance with ASME and UL standards (Class 1 Division 2) for outdoor installation. It is air cooled and equipped with temperature control, bleed valve for depressurization to vent and suction gas filter with automatic condensate drainer.
Ver m醩
BVG 700
Brazil
Screw biogas compressor for upgrading located in Brazil. Designed in compliance with standards for the Brazilian market (INMETRO and NR10-12-13-17 standards) for indoor installation. It is water-cooled and completed with fine filtration, temperature control, electropneumatic by-pass system, and controlled by PLC.
Ver m醩
UVG 315
Italy
Screw biogas compressor for upgrading located in Italy. Designed for classified Atex Zone 2 for outdoor installation. It is air cooled and completed with fine filtration, temperature control, heat recovery, electro-pneumatic bypass valve and controlled by PLC. The compressor is equipped with silencer (maximum noise level: 75 dB(A) at 1 meter).
Ver m醩
UVG 160
Brazil
Two screw biogas compressors for upgrading located in Brazil. Designed in compliance with standards for the Brazilian market (INMETRO and NR10-12-13-17 standards) for outdoor installation. They are air-cooled and equipped with fine filtration, temperature control, electropneumatic by-pass system, and controlled by PLC.
Ver m醩
Model UVG 200
USA
Screw biogas compressor for upgrading located in USA. Designed in compliance with north american standards, suitable for outdoor installation, air-cooled, completed with electro-pneumatic by-pass system and controlled by PLC.
Ver m醩
UVG 22
France
Screw compressor for CO鈧 located in France. Designed for non-hazardous area for outdoor installation. It is air cooled and completed with fine filtration, electrical cabinet in the compressor skid, fully electrical by-pass system and controlled by PLC.
The compressor is equipped with silencers (maximum noise level: 74 dB(A) at 1 meter).
Ver m醩