BIOGAS COMPRESSORS
BVG132/ BVG315
3x UVG 132 聽
LOCATION:聽FRANCE
FLUID: Biogas
POWER INSTALLED: 3x 220 hp
INLET PRESSURE: 4,1 psi(g)
WORKING PRESSURE: Up to 217,6 psi(g)
FLOW RATE: 0<252<504 SCFM
AMBIENT TEMPERATURE: -4/+104 掳F
2x UVG 315
LOCATION: FRANCE
FLUID: Biogas
POWER INSTALLED: 2x 550 hp
INLET PRESSURE: 4,1 psi(g)
WORKING PRESSURE: Up to 217,6 psi(g)
FLOW RATE: 0<623<1246 SCFM
AMBIENT TEMPERATURE: -4/+104 掳F
A plant with five compressors located in France. All units are screw compressors for biogas upgrading. The compressors are designed for Atex Zone 2 for outdoor installations (-4/+104 掳F). They are air-cooled, and equipped with heat recovery, electro-pneumatic bypass system, fine filtration, temperature control and controlled by PLC. All compressors canopies are equipped with two CH4 sensors.
[contact_form]
OTHER REFERENCES
UVG 90
France
Screw biogas compressor for upgrading located in France. Designed for classified Atex Zone 2 for outdoor installation. It is air cooled and completed with medium filtration, temperature control, heat recovery and controlled by PLC.
Ver m醩
UVG75/ADI115
France
Four compressors located in France. Two are screw compressors for 1st stage of biomethane. They are air-cooled and equipped with fine filtration, a bleed valve for depressurization, an electro-pneumatic bypass system, and are controlled by a PLC. The other two are two-stages reciprocating compressors for the 2nd stage for biomethane grid injection. They are also air-cooled and equipped with fine filtration, an electro-pneumatic bypass system, silencers, and are controlled by a PLC. All four units are designed for ATEX Zone 2 area classification and suitable for outdoor installation (14掳F to 104掳F).
Ver m醩
UVG 55
Spain
New series screw biogas compressor for upgrading, destined for the Spanish market. Designed for classified Atex Zone 2 for outdoor installation. It is air cooled and completed with fine filtration, temperature control, heat recovery, bleed valve and controlled by PLC.
Ver m醩
UVG 132
Germany
Screw biogas compressor for upgrading located in Germany. Designed for classified Atex Zone 2 for outdoor installation. It is air cooled and completed with fine filtration, temperature control, heat recovery, electro-pneumatic bypass valve and controlled by PLC. The compressor is equipped with silencers (maximum noise level: 65 dB(A) at 10 meters).
Ver m醩
UVG 132
USA
Screw biogas compressor for upgrading located in USA. Designed in compliance with ASME and UL standards (Class 1 Division 2) for outdoor installation. It is air cooled and equipped with temperature control, bleed valve for depressurization to vent and suction gas filter with automatic condensate drainer.
Ver m醩
BVG 700
Brazil
Screw biogas compressor for upgrading located in Brazil. Designed in compliance with standards for the Brazilian market (INMETRO and NR10-12-13-17 standards) for indoor installation. It is water-cooled and completed with fine filtration, temperature control, electropneumatic by-pass system, and controlled by PLC.
Ver m醩
UVG 315
Italy
Screw biogas compressor for upgrading located in Italy. Designed for classified Atex Zone 2 for outdoor installation. It is air cooled and completed with fine filtration, temperature control, heat recovery, electro-pneumatic bypass valve and controlled by PLC. The compressor is equipped with silencer (maximum noise level: 75 dB(A) at 1 meter).
Ver m醩
UVG 160
Brazil
Two screw biogas compressors for upgrading located in Brazil. Designed in compliance with standards for the Brazilian market (INMETRO and NR10-12-13-17 standards) for outdoor installation. They are air-cooled and equipped with fine filtration, temperature control, electropneumatic by-pass system, and controlled by PLC.
Ver m醩
Model UVG 200
USA
Screw biogas compressor for upgrading located in USA. Designed in compliance with north american standards, suitable for outdoor installation, air-cooled, completed with electro-pneumatic by-pass system and controlled by PLC.
Ver m醩
UVG 22
France
Screw compressor for CO鈧 located in France. Designed for non-hazardous area for outdoor installation. It is air cooled and completed with fine filtration, electrical cabinet in the compressor skid, fully electrical by-pass system and controlled by PLC.
The compressor is equipped with silencers (maximum noise level: 74 dB(A) at 1 meter).
Ver m醩