Serie ADI70/115
Estas estaciones de compresión de gas están diseñadas sobre un soporte de fácil traslado, compuesto por un bloque de compresión alternativo y multietapa, basado en la tecnología del pistón. El bloque es accionado con una correa mecánica mediante un motor eléctrico controlado por inversor.
• ADI70: presiones de funcionamiento disponibles hasta 90.0 bar(g).
• ADI115: presiones de funcionamiento disponibles hasta 100.0 bar(g).
FUNCIONAMIENTO
Compresor de gas horizontal de simple o doble efecto tipo reciprocante, en configuración horizontal o en “W”. Está diseñado con una, dos o tres bielas y varios tamaños de cilindros de hierro fundido o forjados, lo que permite su adaptación a distintas soluciones. Puede ser una unidad de uno, dos o tres etapas, instalada sobre una estructura de acero adecuada.
Alcance principal del suministro:
• Válvula de aspiración y descarga de tipo único
• Cabezal transversal
• Enfriador dotado de un ventilador en las varias etapas de compresión y un final refrigerado por aire
• Filtro de aceite de tipo coalescente
• Válvula de cierre, tanto de succión como de descarga
• Válvulas de seguridad en cada etapa
• Motor eléctrico IG3
Toda la instrumentación necesaria está incluida conforme al estándar del fabricante. Se utiliza una válvula de by-pass proporcional para recircular el gas excedente y reducir el caudal desde el valor a la velocidad mínima del motor hasta el 0%.
PRESIÓN OPERATIVA
hasta 100 bar(g)
CAUDAL DEL GAS
hasta 1.700 Nm3/h
POTENCIA ELECTRICA ABSORBIDA
hasta 200 kW
REFERENCES
UVG75/ADI115
France
Four compressors located in France. Two are screw compressors for 1st stage of biomethane. They are air-cooled and equipped with fine filtration, a bleed valve for depressurization, an electro-pneumatic bypass system, and are controlled by a PLC. The other two are two-stages reciprocating compressors for the 2nd stage for biomethane grid injection. They are also air-cooled and equipped with fine filtration, an electro-pneumatic bypass system, silencers, and are controlled by a PLC. All four units are designed for ATEX Zone 2 area classification and suitable for outdoor installation (14°F to 104°F).
Ver ms
UVG 55
Spain
New series screw biogas compressor for upgrading, destined for the Spanish market. Designed for classified Atex Zone 2 for outdoor installation. It is air cooled and completed with fine filtration, temperature control, heat recovery, bleed valve and controlled by PLC.
Ver ms
UVG 132
Germany
Screw biogas compressor for upgrading located in Germany. Designed for classified Atex Zone 2 for outdoor installation. It is air cooled and completed with fine filtration, temperature control, heat recovery, electro-pneumatic bypass valve and controlled by PLC. The compressor is equipped with silencers (maximum noise level: 65 dB(A) at 10 meters).
Ver ms
UVG 132
USA
Screw biogas compressor for upgrading located in USA. Designed in compliance with ASME and UL standards (Class 1 Division 2) for outdoor installation. It is air cooled and equipped with temperature control, bleed valve for depressurization to vent and suction gas filter with automatic condensate drainer.
Ver ms
BVG 700
Brazil
Screw biogas compressor for upgrading located in Brazil. Designed in compliance with standards for the Brazilian market (INMETRO and NR10-12-13-17 standards) for indoor installation. It is water-cooled and completed with fine filtration, temperature control, electropneumatic by-pass system, and controlled by PLC.
Ver ms
UVG 315
Italy
Screw biogas compressor for upgrading located in Italy. Designed for classified Atex Zone 2 for outdoor installation. It is air cooled and completed with fine filtration, temperature control, heat recovery, electro-pneumatic bypass valve and controlled by PLC. The compressor is equipped with silencer (maximum noise level: 75 dB(A) at 1 meter).
Ver ms
UVG 160
Brazil
Two screw biogas compressors for upgrading located in Brazil. Designed in compliance with standards for the Brazilian market (INMETRO and NR10-12-13-17 standards) for outdoor installation. They are air-cooled and equipped with fine filtration, temperature control, electropneumatic by-pass system, and controlled by PLC.
Ver ms
Model UVG 200
USA
Screw biogas compressor for upgrading located in USA. Designed in compliance with north american standards, suitable for outdoor installation, air-cooled, completed with electro-pneumatic by-pass system and controlled by PLC.
Ver ms
UVG 22
France
Screw compressor for CO₂ located in France. Designed for non-hazardous area for outdoor installation. It is air cooled and completed with fine filtration, electrical cabinet in the compressor skid, fully electrical by-pass system and controlled by PLC.
The compressor is equipped with silencers (maximum noise level: 74 dB(A) at 1 meter).
Ver ms
UVG 160
USA
Screw biogas compressor for upgrading located in USA. Designed in compliance with ASME and UL standards (Class 1 Division 2) for outdoor installation. It is air cooled and completed with fine filtration, temperature control, electro-pneumatic bypass valve and controlled by PLC.
Ver ms
