Biogas compression and treatment system composed of an oil-injected rotary screw gas compressor, directly coupled to an electric motor through a flexible coupling, controlled by inverter and by pass.
The regulator system could be customized to follow customer needs.
Typically used for biogas upgrading.

For more information about the application see also: Power Generation, Renewable Energy.

biogas upgrading compressor with screw compressor
biogas upgrading compressor with screw compressor
biogas upgrading compressor with screw compressor
biogas upgrading compressor with screw compressor
biogas upgrading compressor with screw compressor
biogas upgrading compressor with screw compressor

General information

Up to 1 MW

POWER

Up to 25 bar

PRESSURE

Up to 6000 m3/h

FLOW RATE

See our references:

See other products for biogas application

air and biogas compression system with screw compressor

BVG Series

Biogas compression and treatment system composed of an oil-injected rotary screw gas compressor, directly coupled to an elec-tric motor through a flexible coupling, controlled by inverter and by pass.

blower air and biogas compression system with screw compressor

BL Series

Single side channel blower or wet gases treatment system. Typically used for endothermic engine fuel.

Contac us for a customized offer

    Gases typologies BiogasNatural gasAirOther gas type
    null

    The strength of the screw

    The core of Adicomp compressor stations is the screw pumping unit. It is designed and manufactured by the Termomeccanica Group, of which Adicomp is an integral part.
    null

    Plug & Play

    All Adicomp compressors are designed and made to maximise ease of installation. No special operations are required, except for installation on site and an electricity and gas supply. Everything is already set up in the company and, thanks to the commissioning service, you can fine-tune the operation of the package on site.
    null

    Energy savings, flow control, slide valve

    At Adicomp we keep an eye on energy savings and our compressors are designed to adapt to the flow of gas, which usually is not constant. To do this, our packages can be fitted with inverters, by-pass elements and a slide valve.
    null

    Heat recovery

    About 80% of the heat generated by a screw compressor can be recovered and used to reduce overall energy costs and thereby power various utilities. How? Thanks to dedicated oil/water or gas/water heat exchangers connected to the water supply on site.