Biogas compression and treatment system composed of an oil-injected rotary screw gas compressor, directly coupled to an elec-tric motor through a flexible coupling, controlled by inverter and by pass.
The regulator system could be customized to follow customer needs.
Typically used for turbine fuel, endothermic engine or booster.

For more information about the application see also: Power Generation, Renewable Energy.

sistema di compressione di aria e biogas con compressore rotativo a vitesistema di compressione di aria e biogas con compressore rotativo a vite

General information

Up to 1 MW

POWER

Up to 20 bar

PRESSURE

Up to 6000 Nm3/h

FLOW RATE

See our references:

  • air and biogas compression system with screw compressor

See other products for biogas application

biogas upgrading compressor with screw compressor

UVG Series

Biogas compression and treatment system composed of an oil-injected rotary screw gas compressor, directly coupled to an electric motor through a flexible coupling, controlled by inverter and by pass.

blower air and biogas compression system with screw compressor

BL Series

Single side channel blower or wet gases treatment system. Typically used for endothermic engine fuel.

Contac us for a customized offer

null

The strength of the screw

The core of Adicomp compressor stations is the screw pumping unit. It is designed and manufactured by the Termomeccanica Group, of which Adicomp is an integral part.
null

Plug & Play

All Adicomp compressors are designed and made to maximise ease of installation. No special operations are required, except for installation on site and an electricity and gas supply. Everything is already set up in the company and, thanks to the commissioning service, you can fine-tune the operation of the package on site.
null

Energy savings, flow control, slide valve

At Adicomp we keep an eye on energy savings and our compressors are designed to adapt to the flow of gas, which usually is not constant. To do this, our packages can be fitted with inverters, by-pass elements and a slide valve.
null

Heat recovery

About 80% of the heat generated by a screw compressor can be recovered and used to reduce overall energy costs and thereby power various utilities. How? Thanks to dedicated oil/water or gas/water heat exchangers connected to the water supply on site.