BIOGAS COMPRESSORS
UVG132/ UVG315
3x UVG 132 Â
LOCATION:Â FRANCE
FLUID: Biogas
POWER INSTALLED: 3x 160 kW
INLET PRESSURE: 0,28 bar(g)
WORKING PRESSURE: Up to 15 bar(g)
FLOW RATE: 0<405<809 Nm3/h
AMBIENT TEMPERATURE: -20/+40 °C
2x UVG 315
LOCATION: FRANCE
FLUID: Biogas
POWER INSTALLED: 2x 400 kW
INLET PRESSURE: 0,28 bar(g)
WORKING PRESSURE: Up to 15 bar(g)
FLOW RATE: 0<1000<2000 Nm3/h
AMBIENT TEMPERATURE: -20/+40 °C
A plant with five compressors located in France. All units are screw compressors for biogas upgrading. The compressors are designed for Atex Zone 2 for outdoor installations (-20 /+40). They are air-cooled, and equipped with heat recovery, electro-pneumatic bypass system, fine filtration, temperature control and controlled by PLC. All compressors canopies are equipped with two CH4 sensors.
[contact_form]
OTHER REFERENCES
UVG 315
Italy
Screw biogas compressor for upgrading located in Italy. Designed for classified Atex Zone 2 for outdoor installation. It is air cooled and completed with fine filtration, temperature control, heat recovery, electro-pneumatic bypass valve and controlled by PLC. The compressor is equipped with silencer (maximum noise level: 75 dB(A) at 1 meter).
VIEW MORE
UVG 160
Brazil
Two screw biogas compressors for upgrading located in Brazil. Designed in compliance with standards for the Brazilian market (INMETRO and NR10-12-13-17 standards) for outdoor installation. They are air-cooled and equipped with fine filtration, temperature control, electropneumatic by-pass system, and controlled by PLC.
VIEW MORE
Model UVG 200
USA
Screw biogas compressor for upgrading located in USA. Designed in compliance with north american standards, suitable for outdoor installation, air-cooled, completed with electro-pneumatic by-pass system and controlled by PLC.
VIEW MORE
UVG 22
France
Screw compressor for COâ‚‚ located in France. Designed for non-hazardous area for outdoor installation. It is air cooled and completed with fine filtration, electrical cabinet in the compressor skid, fully electrical by-pass system and controlled by PLC.
The compressor is equipped with silencers (maximum noise level: 74 dB(A) at 1 meter).
VIEW MORE
UVG 160
USA
Screw biogas compressor for upgrading located in USA. Designed in compliance with ASME and UL standards (Class 1 Division 2) for outdoor installation. It is air cooled and completed with fine filtration, temperature control, electro-pneumatic bypass valve and controlled by PLC.
VIEW MORE
ADI115-22
Czech Republic
Single stage reciprocating compressor for biomethane installed in Czech Republic. Designed for classified Atex Zone 2 for outdoor installation. It is air cooled and completed with electro-pneumatic by-pass system, fine filtration and controlled by PLC.
VIEW MORE
ADI115-30
Netherlands
Double stage reciprocating compressor installed in the Netherlands. Designed for classified Atex Zone 2 for outdoor installation. It is water cooled and completed with bleed valve for depressurization to vent, electro-pneumatic proportional bypass valve and controlled by PLC.
VIEW MORE
UVG 650
Denamrk
Two screw compressors for biogas upgrading installed in Denmark. Each compressor is installed inside a dedicated 40' container. They are designed for classified ATEX Zone 2 for outdoor installation. The compressors are water-cooled and completed with heat recovery, temperature control, electropneumatic by-pass valve and are controlled by PLC.
VIEW MORE
UVG 18.5
Germany
Screw biogas compressor for upgrading located in Germany. Designed for classified Atex Zone 2 for outdoor installation. It is air cooled and completed with fine filtration, mechanical bypass valve and controlled by HMI.
VIEW MORE
VG 55
Germany
crew compressor for natural gas located in Germany. Designed for classified Atex Zone 2 for outdoor installation. It is air cooled and completed with fine filtration, electromechanical by-pass system and controlled by PLC.
VIEW MORE