Available with or without integarted gas treatment system, this SSG series is a key industrial solution widely used in refrigeration, gas upgrading & gas grid injection applications, conditioning, petrochemical, chemical engineering and other fields. Its working principle and wide range of applications provide important compression and processing capabilities, enabling any process to be carried out efficiently.

These features result in two important advantages:

• An incredible energy saving resulting on much less running costs (savings of 50,000-60,000 euro/year for a 200 kW model).
• When biomethane injection into a grid operating at pressures of 23-24 bar(g) is required, there is no need to install a final gas booster, resulting in large savings in capital costs

HOW IT WORKS

The wet gas is sucked through a suction filter acting also as a water separator with automatic condensate drain system, then the gas passes through a suction valve. All the components in contact with the gas are made in stainless steel or duly protected, due to the presence of H2S, CO2 and other aggressive contaminants into the gas. During the gas compression process, the oil is injected inside the two-stage rotary screw chamber to perform three main functions: lubrication, sealing and heat absorption, cooler and it is treated before leaving the package.
Working in a close circuit with a gas/oil receiver, oil is pressurized to flow trough an oil cooler, then filtered before being injected again into the screw compression chamber. The gas flows through the minimum pressure /no-return valve into a cooler and it is treated before leaving the package. A sophisticated control system in the Adicomp series manage the operating pressure upstream or downstream the unit, and automatically adjusts compressor speed to modulate output according to the availability or demand of biogas.
Providing adequate conditions maintenance intervals are extended at 8000 operating hours.