SSG Series
SSG Series
and applications
This two-stage screw compressor series has been developed to ensure high performance under complex operating conditions, offering up to 12% higher efficiency compared to single-stage models, thanks to the integration of the HTS23 compressor element.
- Membranes technology
- Turbines feeding
- Boiler feeding
- Gas engine feeding
- Vapor recovery
HOW IT WORKS.
1
The SSG series, with or without integrated gas treatment, is ideal for refrigeration, pipeline boosting, network injection, conditioning, petrochemical, and refinery applications.
2
The flow passes through a separator filter before entering the suction valve. Components in contact with the gas are made of stainless steel or suitably protected.
3
Oil is injected into the high-performance rotary screw chamber to seal and absorb heat; it is then filtered and recirculated within the closed compression circuit.
4
The compressed gas flows through a minimum pressure/check valve, passes a heat exchanger, and undergoes treatment before exiting the system.
5
An advanced system automatically controls compressor pressure and speed, with maintenance intervals up to 8,000 operating hours.
INLET PRESSURE
Up to
1000 mbar(g)
OPERATING PRESSURE
Up to
24,5
bar(g)
FREE GAS DELIVERY
Up to
1.500 Nm3/h
ADSORBED POWER
Up to
250
kW
SSG Series – Codes & Standards
EU
- Classification of hazardous areas: ATEX Zone II
- Pressure vessel code compliance: PED
- Electrical Code Compliance: ISO 60079
- Certified manufactoring organization: ISO 9001:2015 – ISO 14001:2015 – ISO 45001:2018
US
- Hazardous Area Classification: Class 1, Div 2 as defined per NEC, NFPA70
- Pressure Vessel Code Compliance: ASME
- Electrical Code Compliance: UL/Control panels and assemblies
- Certified manufactoring organization: ISO 9001:2015 – ISO 14001:2015 – ISO 45001:2018
- UL 508A, Standard for Industrial Control Panels
- UL 698A, Standard for Industrial Control Panels Relating to Hazardous (Classified) Locations
- NFPA 70 National Electric Code
- ASME B31.3 – Process Pipes.
CA
- Hazardous Area Classification: Class 1, Div 2 as defined per NEC, NFPA70
- Pressure Vessel Code Compliance: ASME -CRN
- Electrical Code Compliance: UL/Control panels and assemblies
- Certified manufactoring organization: ISO 9001:2015 – ISO 14001:2015 – ISO 45001:2018
- UL 508A, Standard for Industrial Control Panels
- UL 698A, Standard for Industrial Control Panels Relating to Hazardous (Classified) Locations
- NFPA 70 National Electric Code
- ASME B31.3 – Process Pipes.
BR
- Classification of hazardous areas: ATEX Zone II
- Pressure Vessel Code Compliance: ASME – NR13
- Electrical code compliance: ISO 60079 – NR10 (Electrical panels and assemblies)
- Certified manufactoring organization: ISO 9001:2015 – ISO 14001:2015 – ISO 45001:2018
- ASME B31.3 – Process Pipes.
IN
- Hazardous Area Classification: ATEX Zone II (HEAVY)
- Pressure Vessel Code Compliance: ASME
- Electrical code compliance: ISO 60079 (Electrical panels and assemblies)
- Certified manufactoring organization: ISO 9001:2015 – ISO 14001:2015 – ISO 45001:2018
- ASME B31.3 – Process Pipes.
Other products
Our applications
By following the principles of the circular economy and producing responsibly, a waste can become a resource thus acquiring a new life. Hoping to create a more ecological and sustainable reality, Adicomp is proud to contribute to the development of solutions using renewable gases such as biogas, biomethane, and hydrogen.
