Line: BVG/UVG

BIOGAS COMPRESSOR UVG315 LOCATION: ITALYFLUID: BiogasPOWER INSTALLED: 400 kWINLET PRESSURE: 400 mbar(g)WORKING PRESSURE: Up to 16 bar(g)FLOW RATE: 0<1009<2018 Nm³/hAMBIENT TEMPERATURE: -10/+40 °C Screw biogas compressor for upgrading located in Italy. Designed for classified Atex Zone 2 for outdoor installation. It is air cooled and completed with fine filtration, temperature control, heat recovery, electro-pneumatic bypass… Continue reading UVG315-Italy

BIOGAS COMPRESSOR UVG160 LOCATION: BRAZILFLUID: BiogasPOWER INSTALLED: 2x 200 kWINLET PRESSURE: 70 mbar(g)WORKING PRESSURE: Up to 15 bar(g)FLOW RATE: 0<420<900 Nm³/hAMBIENT TEMPERATURE: -10/+40 °C Two screw biogas compressors for upgrading located in Brazil. Designed in compliance with standards for the Brazilian market (INMETRO and NR10-12-13-17 standards) for outdoor installation. They are air-cooled and equipped with fine filtration, temperature control, electropneumatic by-pass system,… Continue reading UVG160-Brazil

BIOGAS COMPRESSOR UVG200 LOCATION: USAFLUID: BiogasPOWER INSTALLED: 250 kW INLET PRESSURE: 0.135-0.340 bar(g)WORKING PRESSURE: Up to 11.7 bar(g)FLOW RATE: 0<673<1345 Nm³/hAMBIENT TEMPERATURE: -20/+40 °C Screw biogas compressor for upgrading located in USA. Designed in compliance with north american standards, suitable for outdoor installation, air-cooled, completed with electro-pneumatic by-pass system and controlled by PLC.

CO2 COMPRESSOR UVG22 LOCATION: FRANCEFLUID: COâ‚‚POWER INSTALLED: 30 kWINLET PRESSURE: 0 bar(g)WORKING PRESSURE: Up to 23 bar(g)FLOW RATE: 0<35<68 Nm³/hAMBIENT TEMPERATURE: -10/+40 °C Screw compressor for COâ‚‚ located in France. Designed for non-hazardous area for outdoor installation. It is air cooled and completed with fine filtration, electrical cabinet in the compressor skid, fully electrical by-pass… Continue reading UVG22-France

BIOGAS COMPRESSOR UVG650 UVG160 LOCATION: USAFLUID: BiogasPOWER INSTALLED: 185 kWINLET PRESSURE: 100 mbar(g)WORKING PRESSURE: Up to 16 bar(g)FLOW RATE: 0<466<9857 Nm³/hAMBIENT TEMPERATURE: -20/+40 °C Screw biogas compressor for upgrading located in USA. Designed in compliance with ASME and UL standards (Class 1 Division 2) for outdoor installation. It is air cooled and completed with fine… Continue reading UVG160-USA

BIOGAS COMPRESSOR UVG650 LOCATION: DENMARKFLUID: BiogasPOWER INSTALLED: 2x 750 kWINLET PRESSURE: 55 mbar(g)WORKING PRESSURE: Up to 15,5 bar(g)FLOW RATE: 0<1683<3365 Nm³/hAMBIENT TEMPERATURE: -20/+40 °C Two screw compressors for biogas upgrading installed in Denmark. Each compressor is installed inside a dedicated 40′ container. They are designed for classified ATEX Zone 2 for outdoor installation. The compressors… Continue reading UVG650-Denmark

BIOGAS COMPRESSOR UVG18.5 LOCATION: GERMANYFLUID: BiogasPOWER INSTALLED: 22 kWINLET PRESSURE: 20 mbar(g)WORKING PRESSURE: Up to 12,3 bar(g)FLOW RATE: 0<100 Nm³/hAMBIENT TEMPERATURE: -20/+40 °C Screw biogas compressor for upgrading located in Germany. Designed for classified Atex Zone 2 for outdoor installation. It is air cooled and completed with fine filtration, mechanical bypass valve and controlled by… Continue reading UVG18.5-Germany

BIOGAS COMPRESSOR UVG355 LOCATION: ITALYFLUID: BiogasPOWER INSTALLED: 450 kWINLET PRESSURE: 150 mbar(g)WORKING PRESSURE: Up to 14 bar(g)FLOW RATE: 0<1052<2103 Nm³/hAMBIENT TEMPERATURE: -10/+40 °C Screw compressor for biogas upgrading located in Italy. Designed for outdoor installation. It is water cooled and completed with temperature control, fully electrical by-pass system, fine filtration and controlled by PLC. It… Continue reading UVG355-Italy

BIOGAS COMPRESSOR / RNG GRID INJECTION UVG315/ ADI115 UVG 315   LOCATION: FRANCEFLUID: BiogasPOWER INSTALLED: 400 kWINLET PRESSURE: 150 mbar(g)WORKING PRESSURE: Up to 16 bar(g)FLOW RATE: 0<896<1792 Nm3/hAMBIENT TEMPERATURE: -10/+40 °C ADI 115 LOCATION: FRANCEFLUID: BiomethanePOWER INSTALLED: 75 kWINLET PRESSURE: 8<16 bar(g)WORKING PRESSURE: Up to 70 bar(g)FLOW RATE: 0<435<575 Nm3/hAMBIENT TEMPERATURE: -10/+40 °C Two compressors… Continue reading UVG315/ADI115-France