HVG90-France

HYDROGEN & SYNGAS COMPRESSOR HVG90 LOCATION: FRANCEFLUID: SyngasPOWER INSTALLED: 110 kWINLET PRESSURE: 100 mbar(g)WORKING PRESSURE: Up to 15 bar(g)FLOW RATE: 0<270<344 Nm³/hAMBIENT TEMPERATURE: -10/+40 °C Screw compressor for syngas, with a content of 40% of hydrogen, destined for the French market. Designed for classified Atex Zone 2 for indoor installation. It is water cooled completed with electropneumatic by-pass valve and controlled… Continue reading HVG90-France

HVG series

HVG series These gas compression and treatment stations are designed into an easy handling skid composed of an oil-injected rotary gas screw block, directly coupled to an electric motor through a flexible or magnetic coupling controlled by an inverter. They are designed using suitable materials and technologies for compressing this particular type of gas. •… Continue reading HVG series

VG15-Mexico

BIOGAS COMPRESSOR VG15 LOCATION: MEXICOFLUID: Dry natural gasPOWER INSTALLED: 15 kW INLET PRESSURE: 0.6-2 bar(g)WORKING PRESSURE: Up to 21 bar(g)FLOW RATE: 0<70<75 Nm³/hAMBIENT TEMPERATURE: -10/+40 °C Screw dry natural gas compressor installed in a hydrogen production plant in Mexico. Designed in compliance with north american standards, suitable for outdoor installation, air-cooled, completed with fine filtration, mechanical by-pass valve and controlled by S1-20.

HVG18.5-Netherlands

HYDROGEN COMPRESSOR HVG18.5 LOCATION: NETHERLANDSFLUID: HydrogenPOWER INSTALLED: 22 kWINLET PRESSURE: 0 bar(g)WORKING PRESSURE: Up to 10.5 bar(g)FLOW RATE: 0<43<85 Nm³/hAMBIENT TEMPERATURE: +3/+40 °C Screw compressor designed for hydrogen destined for the Dutch market. It is air cooled, designed for indoor installation, completed with fine oil removal, by-pass valve and controlled by PLC.

CONTACT US

Write us for support or information

×