BIOGAS COMPRESSOR
UVG250
LOCATION: DENMARK
FLUID: Biogas
POWER INSTALLED: 315 kW
INLET PRESSURE: 70 mbar(g)
WORKING PRESSURE: Up to 15.5 bar(g)
FLOW RATE: 0<690<1380 Nm³/h
AMBIENT TEMPERATURE: -20/40 °C
Screw compressor for biogas upgrading located in Denmark. Designed for classificated Atex Zone 2 for outdoor installation, completed with heat recovery, fine filtration and temperature control. It is equipped with silencers for reducing the noise level to 80 dB(A) at 1 meter.
[contact_form]
OTHER REFERENCES
UVG 132
EUA
Compressor de biogás tipo parafuso para o upgrade do biogás, localizado nos EUA.
Projetado em conformidade com os padrões ASME e UL (Classe 1 Divisão 2) para instalação ao ar livre. É resfriado a ar e equipado com controle de temperatura, válvula de alívio para despressurização para a atmosfera e filtro de gás de sucção com dreno automático de condensado.
Ver mais
BVG 700
Brasil
Compressor de parafuso para upgrade de biogás localizado no Brasil. Projetado em conformidade com os padrões do mercado brasileiro (normas INMETRO e NR10-12-13-17) para instalação interna. É resfriado a água e equipado com filtração fina, controle de temperatura, sistema de by-pass eletropneumático e controlado por PLC.
Ver mais
UVG 315
Itália
Compressor de parafuso para biogás, projetado para processos de upgrading de biogás, localizado na ITÁLIA. Desenvolvido para classificação Atex Zona 2, adequado para instalação ao ar livre. É equipado com sistema de refrigeração a ar, filtração fina, controle de temperatura, recuperação de calor, válvula de bypass eletropneumática e controlado por PLC. O compressor possui silenciador, garantindo um nível máximo de ruído de 75 dB(A) a 1 metro.
Ver mais
UVG 160
Brasil
Dois compressores a parafuso para upgrade de biogás, localizados no Brasil. Projetados conforme as normas brasileiras (INMETRO e NR10-12-13-17) para instalação externa. Equipados com resfriamento a ar, filtração fina, controle de temperatura, sistema de by-pass eletropneumático e controle via PLC.
Ver mais
Model UVG 200
USA
Screw biogas compressor for upgrading located in USA. Designed in compliance with north american standards, suitable for outdoor installation, air-cooled, completed with electro-pneumatic by-pass system and controlled by PLC.
Ver mais
UVG 22
France
Screw compressor for CO₂ located in France. Designed for non-hazardous area for outdoor installation. It is air cooled and completed with fine filtration, electrical cabinet in the compressor skid, fully electrical by-pass system and controlled by PLC.
The compressor is equipped with silencers (maximum noise level: 74 dB(A) at 1 meter).
Ver mais
UVG 160
USA
Screw biogas compressor for upgrading located in USA. Designed in compliance with ASME and UL standards (Class 1 Division 2) for outdoor installation. It is air cooled and completed with fine filtration, temperature control, electro-pneumatic bypass valve and controlled by PLC.
Ver mais
ADI115-22
Czech Republic
Single stage reciprocating compressor for biomethane installed in Czech Republic. Designed for classified Atex Zone 2 for outdoor installation. It is air cooled and completed with electro-pneumatic by-pass system, fine filtration and controlled by PLC.
Ver mais
ADI115-30
Netherlands
Double stage reciprocating compressor installed in the Netherlands. Designed for classified Atex Zone 2 for outdoor installation. It is water cooled and completed with bleed valve for depressurization to vent, electro-pneumatic proportional bypass valve and controlled by PLC.
Ver mais
UVG 650
Denamrk
Two screw compressors for biogas upgrading installed in Denmark. Each compressor is installed inside a dedicated 40' container. They are designed for classified ATEX Zone 2 for outdoor installation. The compressors are water-cooled and completed with heat recovery, temperature control, electropneumatic by-pass valve and are controlled by PLC.
Ver mais