BIOGAS COMPRESSOR
UVG160
LOCATION: France
FLUID: Biogas
POWER INSTALLED: 200 kW (each one)
INLET PRESSURE: 150 mbar(g)
WORKING PRESSURE: up to 14 bar(g)
FLOW RATE: 0<448<897 Nm³/h (each one)
AMBIENT TEMPERATURE: -10/+40 °C
Two screw biogas compressors for upgrading installed in anaerobic digestion plant located in France. Air cooled, equipped with stainless steel heat exchanger for heat recovery, completed with fine filtration and sound proof and weather proof canopy suitable for outdoor installation -10°C/+40°C.
[contact_form]
OTHER REFERENCES
UVG 315
Itália
Compressor de parafuso para biogás, projetado para processos de upgrading de biogás, localizado na ITÁLIA. Desenvolvido para classificação Atex Zona 2, adequado para instalação ao ar livre. É equipado com sistema de refrigeração a ar, filtração fina, controle de temperatura, recuperação de calor, válvula de bypass eletropneumática e controlado por PLC. O compressor possui silenciador, garantindo um nível máximo de ruído de 75 dB(A) a 1 metro.
Ver mais
UVG 160
Brasil
Dois compressores a parafuso para upgrade de biogás, localizados no Brasil. Projetados conforme as normas brasileiras (INMETRO e NR10-12-13-17) para instalação externa. Equipados com resfriamento a ar, filtração fina, controle de temperatura, sistema de by-pass eletropneumático e controle via PLC.
Ver mais
Model UVG 200
USA
Screw biogas compressor for upgrading located in USA. Designed in compliance with north american standards, suitable for outdoor installation, air-cooled, completed with electro-pneumatic by-pass system and controlled by PLC.
Ver mais
UVG 22
France
Screw compressor for CO₂ located in France. Designed for non-hazardous area for outdoor installation. It is air cooled and completed with fine filtration, electrical cabinet in the compressor skid, fully electrical by-pass system and controlled by PLC.
The compressor is equipped with silencers (maximum noise level: 74 dB(A) at 1 meter).
Ver mais
UVG 160
USA
Screw biogas compressor for upgrading located in USA. Designed in compliance with ASME and UL standards (Class 1 Division 2) for outdoor installation. It is air cooled and completed with fine filtration, temperature control, electro-pneumatic bypass valve and controlled by PLC.
Ver mais
ADI115-22
Czech Republic
Single stage reciprocating compressor for biomethane installed in Czech Republic. Designed for classified Atex Zone 2 for outdoor installation. It is air cooled and completed with electro-pneumatic by-pass system, fine filtration and controlled by PLC.
Ver mais
ADI115-30
Netherlands
Double stage reciprocating compressor installed in the Netherlands. Designed for classified Atex Zone 2 for outdoor installation. It is water cooled and completed with bleed valve for depressurization to vent, electro-pneumatic proportional bypass valve and controlled by PLC.
Ver mais
UVG 650
Denamrk
Two screw compressors for biogas upgrading installed in Denmark. Each compressor is installed inside a dedicated 40' container. They are designed for classified ATEX Zone 2 for outdoor installation. The compressors are water-cooled and completed with heat recovery, temperature control, electropneumatic by-pass valve and are controlled by PLC.
Ver mais
UVG 18.5
Germany
Screw biogas compressor for upgrading located in Germany. Designed for classified Atex Zone 2 for outdoor installation. It is air cooled and completed with fine filtration, mechanical bypass valve and controlled by HMI.
Ver mais
VG 55
Germany
crew compressor for natural gas located in Germany. Designed for classified Atex Zone 2 for outdoor installation. It is air cooled and completed with fine filtration, electromechanical by-pass system and controlled by PLC.
Ver mais